|
Measurement Boards |
|
▋DAC
Board
▋ |
▋Three-Axis
Accelerometer Board
▋ |
 The
DAC Board is an accessory board provided with
a D/A converter MCP4921 with a serial
peripheral interface (SPI). This board is ideal for
connecting microcontrollers with analog devices.[more
info] |
 The
Three-Axis Accelerometer Board includes a
small, thin, low-power, 3-axis accelerometer ADXL330
with signal conditioned voltage outputs. It measures
acceleration with a minimum full-scale range of ±3
g. It comes with many ready-to-use examples.[more
info] |
|
▋Potentiometer
Board
▋ |
▋EasyADC
Board ▋ |
 The
Potentiometer Board is an accessory board
offering an effective, low-cost solution for testing
analog inputs on a prototype board. Connect your
prototype device to the Potentiometer Board using an
IDC10 connector.
[more
info] |
 The
EasyADC Board enables you to connect your
development board to a 12-bit analog-to-digital
converter (ADC). The board features a 12-bit
analog-to-digital converter (ADC) MCP3204 with 4
inputs and 4.096 voltage reference. [more
info] |
|
▋ADC
PROTO Board
▋ |
▋R2R
DAC Board ▋ |
 The
ADC PROTO Board allows you to add A/D
conversion feature to your prototype device. It
includes a 12-bit ADC MCP3204 with 4 inputs
and 4.096 Voltage Reference. The board can be
used with all MCUs with SPI communication support. [more
info] |
 The
R2R DAC Board features an on-board
digital-to-analog converter R2R that uses
R/2R-network and rail-to-rail operational amplifier
MCP6284 (450 uA, 5 MHz). The board is connected
to a prototype device via an on-board IDC10
connector.[more
info] |
|
▋SHT1X
Board
▋ |
▋SHT1X
PROTO Board ▋ |
 The
SHT1X Board features the SHT11 sensor. It is
connected to a development board through a 2-wire
serial interface, thus enabling you to measure
temperature and humidity. [more
info] |
 The
SHT1X PROTO Board is used to connect your
prototype device with a temperature/humidity sensor.
It features the SHT11 sensor that uses a 2-wire
serial interface, thus enabling you to measure
temperature and humidity. [more
info] |
|
▋Accel
SPI Board
▋ |
▋Distance
Meter Board ▋ |
 The
Accel SPI Board enables you to measure
acceleration with a complete 3-axis acceleration
tool ADXL345 provided on-board. This tool measures
static, as well as dynamic acceleration resulting
from motion or shock.[more
info] |
 The
Distance Meter Board includes the MB1100
sonar range finder with a high power output, noise
rejection, auto calibration and long-range wide
detection zone. The board also includes the MCP6284
signal amplifier and can be connected via IDC10
connectors.
[more
info] |
|
▋Distance
Meter PROTO Board
▋ |
▋Distance
Meter 2 Board ▋ |
 The
Distance Meter PROTO Board enables you to add
the MB1100 sonar range finder to your prototype
device. The MB1100 features a high power output,
noise rejection, auto calibration and long-range
wide detection zone. The board can be connected via
a single-row pin header. [more
info] |
 The
Distance Meter 2 Board enables you to connect
your development board with two MB1100 sonar range
finders. These paired finders provide a wider and
more precise detection zone. The board also contains
the MCP6284 signal amplifier and can be connected
via IDC10 connectors.[more
info] |
|
▋Distance
Meter 2 PROTO Board
▋ |
|
 The
Distance Meter 2 PROTO Board enables you to
connect two MB1100 sonar range finders with your
prototype device easily. Paired finders provide a
wider and more precise detection zone. The board
also contains the MCP6284 signal amplifier and can
be connected via a single-row pin header. [more
info] |
|
