10-Pin Grabber Clip Split Cable

Part No.: MPTP-I2C/SPI-10Pin-Grabber

The 10-Pin Grabber Clip Split Cable offers many benefits similar to our popular 10-Pin Split Cable. This cable attaches to the ribbon cable on the I2C/SPI Host Adapter, the I2C/SPI Protocol Analyzer, or the SPI Host Adapter and provides individual leads for each pin with grabber clips.

Features

The 10-Pin Grabber Clip Split Cable has a 10-pin box header that attaches to the ribbon cable. Each individual lead has a different color and is labeled with the pin name so that they are easy to identify.

Each pin has a grabber clip at the end with the following dimensions. The entire clip is nominally 44mm long. The cap body width is 2.54mm wide and roughly 21.5mm long. The hook of the grabber clip is is 0.51mm wide with a maximum opening of 3.18mm.

The connector is a standard 5x2 0.100" (2.54mm) pitch IDC type keyed box connector. Each individual lead is terminated with a single pin crimp connector with the same 0.100" (2.54mm) pitch. The cable is only 5" (12.7cm) long to minimize signal degradation.

Universal Uses

The 10-Pin Grabber Clip Split Cable is an incredibly useful tool that will save you from having to create or purchase adapter boards for your 10-pin ribbon cable. Although it is labeled with the I2C/SPI Host Adapter and I2C/SPI/MDIO Protocol Analyzer specific pinout, this split cable is universally adaptable to a variety of applications.

This split cable will connect to any standard 0.100" (2.54mm) pitch 10-pin keyed female IDC-type connector.

Related Products