|
Universal CAN converter
Part No.:
MPPK-CAN-ECU-PCAN-Router-P
(with Phoenix connector)
MPPK-CAN-ECU-PCAN-Router-DS
(with D-Sub connector)
MPPK-CAN-ECU-PCAN-Router-DS/ISO
(opto-decoupled with D-Sub connector)
The PCAN router is a dual-channel CAN module
whose NXP LPC21 series programmable microcontroller provides the option
of using the CAN messages on both channels on a flexible basis. This
gives a whole range of options for configuration, manipulation,
evaluation, filtering and routing of CAN messages.
The WinARM software provided (contains the GNU Compiler Collection (GCC)
for C and C++) can be used to produce your own firmware and then
transfer it to the module via CAN. The PCAN-Router is shipped with
demonstration firmware which performs one-to-one forwarding of the CAN
messages between the two CAN channels at 500 kbit/s. The corresponding
source code is included.
The module is installed in an sectional aluminum casing, and is shipped
in versions with two D-Sub connectors, or a screw-terminal strip.
Specifications
- NXP LPC21 series
microcontroller (16/32 bit ARM CPU)
- External 32 kbyte EEPROM
- New firmware can be loaded via
serial or CAN interface
- Two high-speed CAN channels (ISO
11898-2) with transmission rates from 40 kbit/s to 1 Mbit/s
(slower transmission rates available on request)
- An additional LIN channel available
on request
- Galvanic isolation of the D-Sub
connector CAN 2 with the opto-decoupled version
- Status signaling with two 2-color
LEDs
- Connections via two 9-pin D-Sub
connectors or one 10-pole screw-terminal strip (Phoenix)
- Aluminum casing with spring
terminal connectors or D-Sub connectors. Optional DIN rail
fixing option available
- To transfer the firmware via CAN,
you need a PCAN-series CAN interface to connect to your
computer
Scope of supply
- PCAN-Router in aluminum casing
- Windows® software (WinARM software
with GNU Compiler Collection for C and C++) and
demonstration project
- Manual in PDF format
|
