Part No:
MPPK-CAN-ECU-MicroMod-Mix1
(Motherboard Mix 1)
MPPK-CAN-ECU-MicroMod-Mix2
(Motherboard Mix 2)
Application-specific PCAN-MicroMod baseboards
The motherboards for the PCAN-MicroMod provide an application-oriented environment. Typical characteristics of this product group include a wide supply voltage range and the protective circuit for the inputs and outputs.
CANopen® firmware is available for all PCAN-MicroMod motherboards.
Product Specifications of Mix 1
The Mix 1 motherboard combines general analog and digital requirements with temperature recording functions.
- High-speed CAN connection (ISO 11898-2)
- Bit rates from 10 kbit/s up to 1 Mbit/s
- Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
- Completely configurable using the Windows® software PCAN-MicroMod Configuration
- Operating voltage 8 - 26 V
- Aluminum casing with spring terminal connectors. Optional DIN rail fixing option available
- Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)
6 digital inputs with the following properties:
- Pull-up or Pull-down circuit selectable in groups (3 groups)
- Voltage level difference 5 - 18 V
- Schmitt trigger behavior, inverting
- Low pass behavior
- Parallel switching of one frequency input for 4 digital inputs for an alternative use (e.g. for fast status changes, counters)
2 analog inputs with the following properties:
- Pull-down circuit
- Measuring range unipolar 0 - 5 V
- Resolution 10 bit, sample rate 1 kHz
- Measuring range extension optional
- Protection against under- and overvoltages
2 temperature inputs for the connection of NTC resistors (type EC95F103W), measuring range 0 - 70 ºC
(32 to 158 °F)
2 digital outputs (frequency outputs) with the following properties:
- Fast Low-side switch, max. 55 V, 0.75 A
- Short-circuit protection
Product Specifications of Mix 2
The Mix 2 motherboard combines general analog and digital requirements with temperature recording functions.
- High-speed CAN connection (ISO 11898-2)
- Bit rates from 10 kbit/s up to 1 Mbit/s
- Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
- Completely configurable using the Windows® software PCAN-MicroMod Configuration
- Operating voltage 11 - 26 V
- Aluminum casing with spring terminal connectors. Optional DIN rail fixing option available
- Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)
2 digital inputs with the following properties:
- Pull-up or Pull-down circuit selectable in groups (1 group)
- Voltage level difference 5 - 18 V
- Schmitt trigger behavior, inverting
- Low pass behavior
- Parallel switching of one frequency input for an alternative use (e.g. for fast status changes, counters)
3 analog inputs with the following properties:
- Pull-down circuit
- Measuring range unipolar 0 - 4.1 V
- Resolution 10 bit, sample rate 1 kHz
- Measuring range extension optional
- Low pass behavior
- Protection against under- and overvoltages
2 temperature inputs for the connection of one NTC resistor (type EC95F103W) and one platinum sensor PT1000, measuring range 0 - 70 °C (32 to 158 °F) each
1 digital output with the following properties:
- Fast Low-side switch, max. 55 V, 0.75 A
- Short-circuit protection
1 analog output with the following properties:
- Voltage 0 - 10 V on PWM basis at 16 bit resolution
- Load capacity: 15 mA, short-circuit proof
1 analog output with the following properties:
- Current intensity 0 - 20 mA on PWM basis at 16 bit resolution
Scope of supply
- PCAN-MicroMod
- PCAN-MicroMod motherboard in casing including mating connectors
- PCAN-MicroMod Configuration Software for Windows®
- Manual in PDF format
CANopen® firmware is available for all PCAN-MicroMod motherboards.
MPPK-CAN-ECU-MicroMod-Mix1(002202)
MPPK-CAN-ECU-MicroMod-Mix2(002203)
|