網路Networking系列|NET232-DTE
Serial to Ethernet Intelligent Cable Adapter
Part No:MPGC-Net-NET232-DTE-M
DESCRIPTION:
The NET232 is an intelligent plug-and-play RS232-to-Ethernet cable
adaptor that enables any device or machine with a serial port, to become
Ethernet network and Internet enabled. Go from TCP/IP to serial with the
NET232, an intelligent RJ45 to DB9 adapter. It features a powerful built-in
device server, so you can access your serial device from anywhere in the
world over internet! The NET232 is easily configured via a web page, and can
also be set up through the serial port. You can use DHCP, AutoIP or assign a
Static IP address to the NET232!
There are two basic modes of operation, "Redirector" and "Serial
Tunneling".
Redirector Mode: In Redirector Mode, only one NET232 is needed per
serial device. ComPort Redirector Software (free with purchase) is
installed on your Windows PC to create a "virtual" COM Port (e.g. COM3).
You can then use this COM port in your Software application just as you
would any physical COM port attached to your PC. Create a virtual COM
Port for every NET232 device on your network and connect to them all from a
single PC!
Serial Tunneling Mode: In Serial Tunneling
mode, two NET232’s are used to create a "Serial Tunnel" over Ethernet. This
can be thought of as cable replacement. Each NET232 is configured to have a
remote IP address that is the other NET232 in the pair. No software is
required to be loaded on a PC. This is also an excellent option for
non-windows PCs or computers. Now you have an infinite length RS232 cable
that is connected over the internet.
FEATURES:
- Local or Worldwide Ethernet 10/100M or Internet
Connection
Serial baud rates (300, 600, 1200, 2400, 4800,
9600, 19.2k, 38.4k, 115.2K,...921.6K)
Ethernet activity, Power LED’s
Web Server, configuration and user pages
DB9 12" molded cable DTE (male), female adapter
included
Included AC Power adapter, 500mA @ 9VDC (Terminal
Block available)
Encrypted Version available
Plastic housing,
OEM versions available for small minimum quantity
Includes CD with Manuals, PC Setup and Virtual
COM Port Redirector Software
SPECIFICATIONS:
Serial Interface |
Data Rates |
300 bps to 921,600 bps |
Characters |
7 or 8 data bits |
Parity |
odd, even, none |
Stop Bits |
1 or 2 |
Flow Control |
XON/XOFF, RTS/CTS |
Connector |
DB9 - DTE (male). Null Modem adapter included. DCE (female) and
custom cables/connectors (call) also available |
Network Interface |
Interface |
Ethernet 10Base-T or 100Base-TX (Auto-Sensing) |
Connector |
RJ45 |
Protocols |
TCP/IP, UDP/IP, ARP, ICMP, SNMP, TFTP, Telnet, DHCP, BOOTP, HTTP, and
AutoIP |
Indicators (LED) |
- 10Base-T connection
- 100Base-TX connection
- Link & activity indicator - Full/half duplex
- Power
|
Management |
- SNMP, Telnet, serial, internal web server, and Microsoft
Windows®-based utility for configuration
|
Security |
- Password protection
- Optional 256-bit AES Rijndael encryption
|
Internal Web Server |
Storage Capacity |
384KB for web pages |
Architecture |
CPU |
Based on the DSTni-EX enhanced 16-bit, 48MHz or 88MHz, x86 architecture |
Memory |
256KB SRAM and 512KB flash |
Firmware |
Upgradeable via TFTP and serially |
Power |
Input Voltage |
8-24 VDC |
Packaging |
Dimensions |
63.5 x 42.67 x 20.17mm (2.5 x 1.58 x .794 in) - Case without Cable |
Weight |
92 g (3.2 oz) - Approximate, Without Power Supply |
Included Software |
MS Windows®-based DeviceInstaller software device installer and MS
Windows-based Comm Port Redirector |
Certifications |
CE |
|
|