網路Networking系列|NET232-DCE
Intelligent Ethernet to Serial Cable Adapter
Part No:MPGC-Net-NET232-DCE-F
Description: The NET232
is an intelligent plug-and-play RS232-to-Ethernet cable adaptor that
enables any device or machine with a serial port, to become Ethernet
network and Internet enabled. Go from Ethernet to serial with the
NET232. It features a powerful built-in device server, so you can
access your serial device from anywhere in the world over internet!
The NET232 is easily configured via a web page, and can also be set
up through the serial port. You can use DHCP, AutoIP or assign a
Static IP address to the NET232!
There are two basic modes of operation, "Redirector" and "Serial
Tunneling".
Redirector Mode:
In Redirector Mode, only one NET232 is needed
per serial device. ComPort Redirector Software (free with purchase)
is installed on your Windows PC to create a "virtual" COM Port (e.g.
COM3). You can then use this COM port in your Software application
just as you would any physical COM port attached to your PC. Create
a virtual COM Port for every NET232 device on your network and
connect to them all from a single PC!
Serial Tunneling
Mode: In Serial Tunneling mode, two NET232’s are used to create
a "Serial Tunnel" over the internet. This can be thought of as cable
replacement. Each NET232 is configured to have a remote IP address
that is the other NET232 in the pair. No software is required to be
loaded on a PC. This is also an excellent option for non-windows
PCs or computers. Now you have an infinite length RS232 cable that
is connected over the intern et.
FEATURES:
- Local or Worldwide Ethernet 10/100M or
Internet Connection
Serial baud rates (300, 600, 1200, 2400,
4800, 9600, 19.2k, 38.4k, 115.2K,...921.6K)
Ethernet activity, Power LED’s
Web Server, configuration and user pages
DB9 12" molded cable DCE (female), male
adapter included
Included AC Power adapter, 500mA @ 9VDC
(Terminal Block available)
Encrypted Version available
Plastic housing,
OEM versions available for small minimum
quantity
Includes CD with Manuals, PC Setup and Virtual COM Port Redirector Software
SPECIFICATIONS:
|
Serial Interface |
|
Data Rates |
300 bps to 921,600 bps |
|
Characters |
7 or 8 data bits |
|
Parity |
odd, even, none |
|
Stop Bits |
1 or 2 |
|
Control Signals |
DTR/DCD, CTS, RTS |
|
Flow Control |
XON/XOFF, RTS/CTS |
|
Connector |
DB9 - DCE (female). Male adapter included. DTE (male) and
custom cables/connectors (call) also available |
|
Network Interface |
|
Interface |
Ethernet 10Base-T or 100Base-TX (Auto-Sensing) |
|
Connector |
RJ45 |
|
Protocols |
TCP/IP, UDP/IP, ARP, ICMP, SNMP, TFTP, Telnet, DHCP, BOOTP,
HTTP, and AutoIP |
|
Indicators (LED) |
- 10Base-T connection
- 100Base-TX connection
- Link & activity indicator - Full/half duplex
- Power
|
|
Management |
- SNMP, Telnet, serial, internal web server, and Microsoft
Windows®-based utility for configuration
|
|
Security |
- Password protection
- Optional 256-bit AES Rijndael encryption
|
|
Internal Web Server |
|
Storage Capacity |
384KB for web pages |
|
Architecture |
|
CPU |
Based on the DSTni-EX enhanced 16-bit, 48MHz or 88MHz, x86
architecture |
|
Memory |
256KB SRAM and 512KB flash |
|
Firmware |
Upgradeable via TFTP and serially |
|
Power |
|
Input Voltage |
8-24 VDC |
|
Packaging |
|
Dimensions |
63.5 x 42.67 x 20.17mm (2.5 x 1.58 x .794 in) - Case without
Cable |
|
Weight |
92 g (3.2 oz) - Approximate, Without Power Supply |
|
Included Software |
|
MS Windows®-based DeviceInstaller software device installer and
MS Windows-based Comm Port Redirector |
|
Certifications |
|
CE |
|
|
|
|
