CAN,
LIN, ISO11898-2/3, USB to CAN, PCI to CAN, PC104 to CAN, UART to CAN, PCI
Express to CAN, LIN to CAN, ISA to CAN, J1587, K-Line, SWC, J1850, CAN
Development Kit
Smallest Integrated Device Server
Ethernet to Serial
Part No: MPGC-Net-NET232jr
DESCRIPTION:
The NET232jr is
the mini version of the NET232, an RS232-to-Ethernet cable adaptor
that enables any device or machine with a serial port to become
Ethernet network and Internet enabled. Now you can keep the IP
address in the cable and exchange the serial device without having
an IT person. The NET232jr is designed to be an OEM device and
can be customized to have different types of cables: RJ45, DB9/male,
DB9/female or your custom connector. To help you with the possible
customization options we have a selection guide, see the
documentation section for this guide.
The major difference between the NET232 and the NET232jr is the jr
requires that 3.3V or 5V be supplied on the serial connector.
The NET232jr features a powerful built-in device server so you can
access your serial device from anywhere in the world over internet!
The NET232jr is easily configured via a web page and can also be set
up through the serial port. You can use DHCP, AutoIP or assign a
Static IP address to the NET232jr!
There are two basic modes of operation, 〝Redirector〞 and 〝Serial
Tunneling〞.
Redirector
Mode: In
Redirector Mode, only one NET232jr is needed per serial device.
ComPort Redirector Software (free with purchase) is installed on
your Windows PC to create a 〝virtual〞 COM Port (e.g. COM3). You can
then use this COM port in your Software application just as you
would any physical COM port attached to your PC. Create a virtual
COM Port for every NET232jr device on your network and connect to
them all from a single PC!
Serial Tunneling Mode:
In Serial Tunneling mode, two NET232jr’s are used to create a
〝Serial Tunnel〞 over Ethernet. This can be thought of as cable
replacement. Each NET232jr is configured to have a remote IP
address that is the other NET232jr in the pair. No software is
required to be loaded on a PC. Now you have an infinite length
RS232 cable that is connected over the internet. This
configuration is also an excellent option for non-windows PCs or
computers.
FEATURES:
Local or Worldwide Ethernet 10/100M or Internet Connection
Serial baud rates (300, 600, 1200, 2400,
4800, 9600, 19.2k, 38.4k,
115.2K,...921.6K)
Ethernet activity, Power LED^s
Web Server, configuration and user pages
User defined serial cable (RJ45 shown),
other options DB9
Encrypted Version available
Plastic housing
OEM versions available for small minimum quantity
Includes CD with Manuals, PC Setup and Virtual COM Port Redirector
Software
SPECIFICATIONS:
Serial Interface |
Data Rates |
300 bps to
921,600 bps |
Characters |
7 or
8 data bits |
Parity |
odd, even, none |
Stop Bits |
1 or 2 |
Flow Control |
XON/XOFF, RTS/CTS |
Connector |
DB9 - DTE (male)
or DCE (female) or RJ45 or custom cables/connectors (call) also
available |
Network Interface |
Interface |
Ethernet
10Base-T or 100Base-TX (Auto-Sensing) |
Connector |
RJ45 |
Protocols |
TCP/IP, UDP/IP,
ARP, ICMP, SNMP, TFTP, Telnet, DHCP, BOOTP, HTTP, and AutoIP |
Indicators (LED) |
- 10Base-T connection
- 100Base-TX connection
- Link & activity indicator - Full/half
duplex
- Power
|
Management |
- SNMP, Telnet, serial, internal web
server, and Microsoft
Windows®-
based utility for configuration
|
Security |
- Password protection
- Optional 256-bit AES Rijndael
encryption
|
Internal Web Server |
Storage
Capacity |
384KB for web
pages |
Architecture |
CPU |
Based on the
DSTni-EX enhanced 16-bit, 120MHz, x86 architecture |
Memory |
256KB SRAM and
512KB flash |
Firmware |
Upgradeable via
TFTP and serially |
Power |
Input Voltage |
3.3VDC on the
connector |
Packaging |
Dimensions |
55mm x 30mm x
24mm - Case without Cable |
Weight |
5.0 oz. |
Included Software |
MS
Windows®-based DeviceInstaller software device installer and MS
Windows-based Comm Port Redirector |
Certifications |
CE |
|
|