Port No:MPINTRO-Analyzers-Logic-LA1034
Our LA1034 LogicPort fills the void
between expensive analyzers with many channels, and inexpensive
analyzers with few channels and limited sample rates.
The LogicPort provides 34 channels
sampled at 500MHz. This includes two state-clock inputs which function
as normal sampled channels in timing-mode. The LogicPort is controlled
and powered via your PC^s USB 1.1 or 2.0 port for the ultimate in
convenience and portability.
Features include multi-level
sequential trigger capability, qualified state-mode sampling with
adjustable setup/hold window, selectable logic sense and threshold,
built-in interpreters for CAN, I2C, SPI and RS232 protocols, and much
more.
The LogicPort’s advanced trigger
features allow it to trigger on simple or complex sequences of edges,
patterns and bus numerical ranges, as well as on specified pattern,
range or pulse durations.
You’ll find the LogicPort to be
feature-rich, yet simple to use. Visit our
Contact US to try the free software for yourself. The installation
includes real-world examples of actual acquired data. Explore a 125MHz
SDRAM interface sampled at 500MHz, the outputs of a 100MHz A/D converter
sampled in state mode, interpreted CAN, I2C, SPI and RS232 data streams,
activity on a typical Intel processor bus and more.
Specifications
Sampled channels:
34 |
Timing mode sample rate:
1KHz to 500MHz
(uses LogicPort
internal clock) |
State mode sample rate:
0 to 200MHz
(clock provided by
circuit under test) |
Sample buffer:
34 x 2048 samples |
Maximum sample compression:
2"33 to 1 (sample rates to 200MHz) |
Trigger sequencer:
250MHz max, 4ns minimum pulse width |
Trigger event counters:
20 bits, range 1 to 1,048,576 for each trigger level |
Input impedance:
200KΩ, paralleled by <5pF |
Frequency counter range:
300MHz with 10Hz resolution, 4
channels |
Threshold range:
adjustable +6 to -6 volts with 50mv
resolution |
Threshold accuracy:
+/-(100mV + 5% of setting) |
Channel to channel skew:
0.6ns typical, 1.0ns max |
State mode Setup/Hold times:
2.0/0ns, window adjustable +/-2.5ns |
Input sensitivity:
0.25Vpp @50MHz, 0.5Vpp @150MHz,
0.8Vpp @250MHz |
Input dynamic range:
10 volts peak-peak |
Maximum input:
+/-40 volts DC, 15 volts peak-peak AC |
Timebase accuracy:
+/-0.005% over full temperature range |
Input Probe:
Teflon insulated leads terminated with individual contacts
suitable for use with 0.025"-0.030" round or
square pins. |
Power supply current:
200 milliamps max (supplied by USB) |
Temperature range:
operating +5 to +50C, storage -10 to
+65C |
Minimum system requirements: |
Pentium II or better (400MHz or faster recommended) |
32MB available memory |
20MB available disk space |
Display resolution at least 800 x 600 (1024 x 768 recommended) |
USB 1.1 or 2.0 port |
LogicPort is compatible with the
following operating systems: |
Windows 98 |
Windows 98 Second Edition |
Windows ME |
Windows 2000 |
Windows XP Home |
Windows XP Professional |
|