CANopen - CAN Bus 之工業控制|eAutomind

wwwMicroport

 現在的位置: 首頁產品簡介

PoScope basic2 bundle

(未稅)台幣定價:0
產品價格標示為"0"表示未定價,
    索取報價請按聯絡我們
PoScope basic2 bundle
 

簡易規格下載

PoScope basic2 bundle

電子玩家必備

Part No:MPPO-LGAL-basic2

Description

The PoScope Basic2 includes:

  • 1 PoScope Basic2
  • 2 PoProbe60
  • 1 PoProbeL2
  • 1 USB cable

Using the Plug and Play USB technology, the PoScope Basic2 oscilloscope is easy to setup and use. The software is a fully featured oscilloscope, chart recorder, logic generator, logic analyser, and spectrum analyser with advanced trigering all in one easy to use package. Software in English, French, German, Italian and Spanish language.

Low current consumption: 40mA.

PoScope Basic2 modes:

2-channels oscilloscope

  • Sample rate: 100 Hz - 200 kHz
  • Input voltage: -20 - +20 V
  • ADC capacity: 10 bits
  • Triggering: absolute, differential, external
  • Window functions: Hamming, Hanning, Blackman, Blackman-Harris

2-channels spectrum analyzer

  • Sample rate: 100 Hz - 200 kHz
  • Input voltage: -20 - +20 V
  • ADC capacity: 10 bits
  • Triggering: absolute, differential, external
  • Window functions: Hamming, Hanning, Blackman, Blackman-Harris

16-channels logic analyzer

  • Sample rate: 1 KHz - 8 MHz
  • Input voltage: 0 - 5V
  • Triggering: edge, level, mask
  • Decoding: UART, SPI, I2C and 1-Wire

2-channels recorder

  • Marker measurements
  • Option to add 99 markers with comments
  • Maximum, minimum and average voltage measurement for each channel
  • Waveform record within several tens of hours

5 channels square signal and PWM generator

  • Frequency: 3,91 kHz – 1 Mhz
  • Duty cycle: 1- 99% f=7,8125 kHz

8-channels pattern generator

  • Sample rate: 1 KHz - 1 MHz
  • Memory depth: 1544 bit/channel
  • Output voltage: logic 0 = 0V, logic 1 = 3.3 V
  • Maximum input/output current: 10 mA

Minimum computer requirements:

  • Minimum resolution 1024x768@24bit
  • RAM 512 MB
  • Processor 1GHz
  • Windows Xp, Vista, 32 bit
  • free USB slot

Related products

PoProbe60-100PoProbe60-100

60 MHz Oscilloscope Probe Bandwidth DC~40MHz( +/- 1dB), DC~60MHz(+/-3dB) Input R 100M Ohm Input C : at Oscilloscope Input 20pF Compensation range: 15pF-50pF MAX Input Voltage DC 2000V

PoProbe60PoProbe60 oscilloscope probe

 

60 MHz Oscilloscope Probe ITEM 10:1 Bandwidth: DC~40MHz( +/- 1dB), DC~60MHz(+/-3dB) Item 1:1 Bandwidth: DC~3MHz(+/-1dB), DC~6MHz(+/- 3dB) Input R 10:1 =10M Ohm = 22pF Input R 1:1 =1M Ohm (Oscillosocpe) = 180pF Input C : at Oscilloscope Input 20pF ATT Ratio : 1/10 ; 1/1 MAX Input Voltage DC 600V

PoProbeL1PoProbeL1 logic analyzer probe

Length: 35 cm 16 red clips for signals A0-A7 and B0-B7 2 black clips for GND All clips marked

 

 

 

usbScope中文使用手冊下載

PoScope basic2 bundle簡易規格下載
 

最新消息| 公司簡介| 產品簡介 | 線上報價 | 經銷夥伴 | 下載 | 搜尋商品 | 聯絡我們

© 2018 標高電子股份有限公司 著作權所有,並保留一切權利。