Part No:MPCS-DT-CS320A
CS320A is a USB 2.0 mixed signal PC oscilloscope
which brings benefits to the user that are unavailable from traditional
stand-alone oscilloscopes.
Its innovative approach delivers an unbeatable combination of affordability,
ease of use and documentation of test results with the simple 〝Copy and
Paste〞 facility .
CS320A is a USB connected, PC hosted oscilloscope and
spectrum analyzer with PC based application software.
Key features include...
- 2 by 10, 12 or 14 bit analog channels - 100 MSa/s
simultaneously
- USB 2.0 Interface to the PC
- Huge 4/8M Samples storage per channel - up to
32Mbytes in total
- Highly flexible mixed signal triggering
- View small ac signals superimposed on large dc
or ac offset
- Windows application software XP & Vista, 32 or
64bit
- Simple Copy and Paste into other applications
such as Word, Excel
- Oscilloscope and Spectrum analyzer displays
- Self calibration
- Upgradeable firmware
- CE approved
- Includes all probes, cables, power supply,
software and manual
CS320A Acquisition Unit
- Two 10, 12 or 14 bit analog channels sampling
simultaneously at 100 MSa/sec. AC or DC coupled.
- USB 2.0 Interface to the PC or 10/100Mbit
ethernet, depending on option
- Gain automatically set from 20mV full scale to
800V full scale by choosing graph view and probe switch setting.
- Offset automatically set to correspond to the
selected amplitude axis view. As an example a graph with amplitude axis
of 2.40 to 2.42V automatically chooses a 20mV range offset by +2.40V -
good for looking at small signals in single supply op-amp applications.
- Analog triggering of the waveform in view with
a resolution of 1% of the display height. The analog trigger may
optionally be conditioned with a low pass, high pass or noise filter.
- One external trigger, threshold adjustable from
0 to ±20V in 40 mV increments.
- A dual hardware trigger system based on a
rising or falling edge on any input signal, optionally qualified by a
user defined digital input combination, triggering when one or both
trigger conditions are met, and the time between triggers is less than,
in or more than a user defined range, or the trigger count equals a user
defined value.
- A rear panel I/O connector with a 100 Mbit/sec
bi-directional LVDS/RS422 link, and three RS422 outputs defaulting to
sampling started, trigger received and sampling stopped.
- Each channel (two analog, ext trigger and eight
digital) includes 4 or 8M samples of storage, providing up to 40 ms of
simultaneous storage for each channel, with 10 ns resolution.
- The sample storage may be allocated as between
2 to 3000 frames varying in size from 4M to 2000 samples. These may be
used as a history store for reviewing previously captured signals, or to
capture up to 3000 trigger events with a minimal inter-frame delay,
while maintaining time relative to the first trigger for all succeeding
frames.
- 20 MHz 5th order Anti-alias filter for improved
Spectrum Analysis performance.
- Triggered LED and Power LED on the front panel.
- Input power range from 6 ~ 12V, 6W provided by
a universal mains adaptor.
- Low jitter (1 ps rms) sampling clock for 70 dB
spurious free dynamic range.
- Self calibration to ensure DC performance
specifications are met.
- Enclosure size: 153 x 195 x 35 mm.
CS300 Application Software
- Separate, freely moveable and resizable windows
to display the signal, a zoomed signal view, and the frequency spectrum
of the signal, and control panel.
- The zoomed signal view optionally tracks the
signal view cursor.
- Spectrum analysis with a variety of
conditioning windows and display in log or linear format.
- Each signal window includes a time/amplitude
tracer, and two markers for comparison purposes. Colours are user
definable.
- Signal averaging (exponential, block and peak
hold) and low pass filtering.
- Signal measurement, including Peak to Peak, RMS,
DC, pulse width, period and frequency.
- Copy and Paste graphic or data to other
applications.
- Save and Open from disk.
- User defined units, signal names and scaling
(offset and gain).
- Text annotation of each graph.
CS320A Equipment List
The following equipment is included with the CS320A:
- 1 x CS320A Oscilloscope Acquisition Unit
- 1 x Power Supply Unit and lead
- 2 x CS1001 1x/10x 150MHz probe kit
- 1 x USB cable
- 1 x CS300 Application Software CD
- 1 x CS328 User Manual
|
|