Unigate CL Ethernet 10
Part
No:MPGC-MB-UGW-CL-ETHERNETIP
DESCRIPTION:
Ethernet/IP-enable any RS232/485/422 serial or Modbus device with the
UNIGATE CL Gateway. Make any serial device a Ethernet/IP Slave using the UNIGATE CL Gateway. Its low-cost and flexibility are ideal for high volume
applications. One side of the gateway is a fieldbus, Ethernet/IP Slave,
while the other side is a high performance serial port that directly
interfaces with your serial device. The serial side of the UNIGATE can
either be used in one of many standard configurations (including Modbus RTU
master/slave and standard RS232/422/485), or can be customized with its
built-in scripting language.
Volume and OEM pricing available.
CUSTOM PROTOCOLS:
The UNIGATE CL Gateway allows for the quick development of custom
applications on the serial side using its powerful scripting language. When developing a custom application, or for simple configuration to a
standard protocol, we recommend using a
Starter Kit. Starter kits contain all the connection cables and
power supplies for configuring and/or scripting. There is even a
Ethernet/IP Master tool for testing your configuration or script.
Scripts are written using the Protocol Developer Tool. If you
need a custom protocol and scripting is not for you, Grid Connect offers
scripting services at reasonable rates (call for details).
Unigate CL Ethernet/IP Gateway Features:
- Complete Ethernet/IP Slave
- Max. 500 byte input and 500 byte output data
- Isolated Ethernet/IP interface, optional galvanic isolation of the
serial RS side
- Ethernet/IP Baud Rates up to 100 Mbps
- Serial RS232, RS422 and RS485 interfaces on board
- Serial Baud rates up to 625 kbps
- Script language for optimal adaptation to your field device
- Easy configuration from MS Windows® using the WinGate tool.
- Develop customized scripts with the free Protocol Developer
software tool
- Scripts are portable between all other UNIGATE CL or IC Gateways
Serial Interface |
Data Rates |
110 to 625 kbps Baud |
Characters |
7 or 8
data bits |
Parity |
odd, even, none |
Stop Bits |
1 or 2 |
Protocols |
RS232, RS422 or
RS485, Modbus, plus Custom Protocols through Scripting |
Data Buffer |
1024 Bytes Input and
1024 Bytes Output |
LEDs |
6 Total (Power(1),
Code (4), State (1)) |
Connector |
RS232 - 3 Pole
Terminal Block (Tx, Rx, Gnd), RS422/RS485 - 4 Pole Terminal Block (RxA,
RxB, TxA, TxB) |
Ethernet/IP Interface |
Protocols |
Ethernet/IP
Communication Adapter |
Slave Address |
MAC / IP addressing |
Connector |
RJ45 |
Bus Termination |
Switch-able |
Bus Baud Rate |
Auto-sensing, up to
100 Mbps |
Bus Buffer |
500 Bytes I/O |
LEDs |
3 Total (Power(1),
Bus(1), State (1)) |
Isolation |
Galvanic Isolation |
Configuration/Programming ("Debug") Port
Interface |
Protocols |
RS232 (9600 Baud, 8,
n, 1) |
Connector |
Terminal Block (Tx,
Rx) |
Power |
Current |
Typical 120mA, max.
150mA at 24VDC |
Input Voltage |
10.8 to 30VDC |
Protection |
Reverse Voltage, Short
Circuit, Overload, Under voltage |
Environmental |
Operating Temp |
0° to 55°C |
Storage |
-40° to 70°C |
IP Rating |
IP24 (Ingress
Protection) |
Packaging |
Dimensions |
23 x 115 x 100 mm |
Weight |
130 g |
Mounting |
Din-Rail |
Included Software |
MS
Windows®-based WinGate configuration software, and Protocol
Developer script development software |
Certifications |
ODVA
Ethernet/IP, CE |
|
|