Part No
Part
No:MPGC-MB-UGW-CL-FASTETHERNET
Ethernet-enable any RS232/485/422 serial or Modbus device with the
UNIGATE CL Gateway. Make any serial device an Ethernet device using the
UNIGATE CL Gateway. Its low-cost and flexibility are ideal for high
volume applications. One side of the gateway is Ethernet, while the
other side is a high performance serial port that directly interfaces
with your serial device. The serial side of the UNIGATE can either be
used in one of many standard configurations (including Modbus RTU
master/slave and standard RS232/422/485), or can be customized with its
built-in scripting language. Volume and OEM pricing available.
CUSTOM PROTOCOLS:
The UNIGATE CL Gateway allows for the quick development of custom
applications on the serial side using its powerful scripting
language. When developing a custom application, or for simple
configuration to a standard protocol, we recommend using a
Starter Kit. Starter kits contain all the connection cables and
power supplies for configuring and/or scripting. Scripts are written
using the Protocol Developer Tool. If you need a custom protocol
and scripting is not for you, Grid Connect offers scripting services at
reasonable rates (call for details).
Unigate CL Fast
Ethernet Gateway Features:
Complete Ethernet Device Server
Supports Ethernet UDP, TCP/IP,
Modbus TCP, email, Webserver...
Max. 1024 byte input and 1024 byte
output data
Isolated Ethernet interface,
optional galvanic isolation of the serial RS side
Ethernet Baud Rates from 10 to 100
Mbps
Serial RS232, RS422 and RS485
interfaces on board
Serial Baud rates up to 625 kbps
Script language for optimal
adaptation to your field device
Easy configuration from MS Windows®
using the WinGate tool.
Develop customized scripts with the
free Protocol Developer software tool
Scripts are portable between
all other UNIGATE CL or IC Gateways
SPECIFICATIONS:
|
Serial
Interface |
|
Data Rates |
110 to 625 kbps Baud |
|
Characters |
7 or 8 data bits |
|
Parity |
odd, even, none |
|
Stop Bits |
1 or 2 |
|
Protocols |
RS232, RS422 or RS485, Modbus, plus
Custom Protocols through Scripting |
|
Data Buffer |
1024 Bytes Input and 1024 Bytes Output |
|
LEDs |
6 Total (Power(1), Code (4), State (1)) |
|
Connector |
RS232 - 3 Pole Terminal Block (Tx, Rx,
Gnd), RS422/RS485 - 4 Pole Terminal
Block (RxA, RxB, TxA, TxB) |
|
Ethernet
Interface |
|
Protocols |
UDP, TCP/IP, Modbus
TCP, email, Webserver |
|
Slave Address |
MAC and IP addressing |
|
Connector |
RJ45 |
|
Bus Termination |
None |
|
Bus Baud Rate |
Auto-sensing, 10 to 100 Mbps |
|
Bus Buffer |
1024 Bytes I/O |
|
LEDs |
3 Total (Power(1), Bus(1), State (1)) |
|
Configuration/Programming ("Debug") Port
Interface |
|
Protocols |
RS232 (9600 Baud, 8, n, 1) |
|
Connector |
Terminal Block (Tx, Rx) |
|
Power |
|
Current |
Typical 120mA, max.
150mA at 24VDC |
|
Input Voltage |
10.8 to 30VDC |
|
Protection |
Reverse Voltage, Short Circuit,
Overload, Under voltage |
|
Environmental |
|
Operating Temp |
0° to 55°C |
|
Storage |
-40° to 70°C |
|
IP Rating |
IP24 (Ingress Protection) |
|
Packaging |
|
Dimensions |
23 x 115 x 100 mm
|
|
Weight |
130 g |
|
Mounting |
Din-Rail |
|
Included
Software |
|
MS Windows®-based WinGate
configuration software, and Protocol
Developer script development
software |
|
Certifications |
|
CE |
|
|
