|
Serial Interface |
|
DataHighway Plus (DH+) |
3 Pin Screw Terminal (Phoenix type) Speeds
of 57.6K, 115.2K and 230.4K (Auto-Baud) |
|
RS232 Configuration port |
DB9 - DTE (male) -
19200,N,8,1 and XON/XOFF flow control. |
|
Connector |
Null Modem adapter included.
DCE (female) and custom cables/connectors (call) also available |
|
Network Interface |
|
Interface |
Ethernet 10Base-T or 100Base-TX
(Auto-Sensing) |
|
Connector |
RJ45 |
|
Protocols |
Modbus TCP, Telnet |
|
Modbus TCP Connections |
Up to 8 simultaneous Modbus TCP
connections are supported |
|
Power |
|
Input Voltage |
9-27V DC – 3.0 Watts |
|
Environmental |
|
Operating Temp |
32 to 122 °F (0 to 50 °C) |
|
Storage Temp |
-40 to 185°F (-40 to 85°C) |
|
Humidity |
5% to 95% non-condensing |
|
Phsyical |
|
Dimensions |
1.2" H x 4.75" D x 3.2" W (30.4 x 120.7 x
81.3 mm) |
|
Weight |
0.56 Lbs (0.2 Kg) |
|
Indicators (LED) |
|
˙CHA
A-B Network Status
˙CHB
Ethernet Activity (TX/RX).
˙CHC
DL6000 Operating Mode and Status
˙Ethernet
Activity (Port TX/RX) On the right
side of the RJ45
˙10/100
Base-T Ethernet Link Status On the left
side of the RJ45 |
|
Pushbuttons |
RESET pushbutton (left side), Configure
pushbutton (right side). |
|
Included Software |
|
MS Windows® Device Installer - used
to assign IP address and update firmware
MS Windows®
CommPort Redirector - virtual COM Port software
MS Windows® EQ32
Configuration - used to map Modicon registers/coils to
Allan-Bradley data files within the PKV6000 |
