CANopen - CAN Bus 之工業控制|eAutomind

wwwMicroport

 現在的位置: 首頁產品簡介

APUS I2C/SPI/GPIO Host Adaptor

(未稅)台幣定價:0
產品價格標示為"0"表示未定價,
    索取報價請按聯絡我們
APUS I2C/SPI/GPIO Host Adaptor
 

簡易規格下載

APUS I2C/SPI/GPIO Host Adaptor

I2C/SPI/GPIO Host Adapter, APUS

產品簡介 I2C 系列 APUS I2C/SPI/GPIO Host Adapter

Part No:MPTP-I2C/SPI-APUS

APUS Overview

APUS is an interface adapter designed for controlling any test system incorporating I2C, SPI or general purpose IOs (GPIO). Today, the usage of these protocols is extremely widespread, including electronics for telecommunications, portable electronics and medical electronics.

APUS is simply connected to the system under test using one or more of the available interfaces. APUS accepts USB commands from the host PC and then implements the necessary bus protocol for I2C bus, SPI bus or GPIO bus as required. The connection back to the host PC is via a standard USB cable, which provides all power requirements of APUS.

Host PC

The host PC includes the necessary driver and DLL to implement the high level commands so that the user can rapidly develop his/her own custom applications.

Typical applications are written in C/C++ or Visual C++. Users have the choice of developing GUI-style control applications or non-Windows-batch-style control - depending on the requirements.

APUS comes with a rich set of example applications and documentations, making custom applications an extremely simple process even for those with little programming knowledge.

I2C Bus Interface:

The I2C bus interface contains both master I2C and slave I2C capability with line rates of 10kBit/s, 100kBit/s, 200kBit/s, 400kBit/s, 1MBit/s, 3MBit/s and 6MBit/s.

The interface supports wait-stating through clock stretching by the slave.Back-to-back I2C commands are supported using repeated start.

A jumper setting allows the interface to have no pull-up resistors, on-board 1.5kOhm pull-up resistors to 5V or on-board 1.5kOhm pull-up resistors to 3.3V.

SPI Bus Interface

The SPI bus interface contains both SPI master and SPI slave capability with full duplex (simultaneous read/write) at line rates of 10kBit/s, 100kBit/s, 200kBit/s, 400kBit/s, 1MBit/s, 3MBit/s, 6MBit/s and 12MBit/s.The interface has configurable clock polarity (CPOL) and clock phase (CPHA). The SPI interface can interface up to 17 master or slave devices by using some of the GPIO pins as chip selects. Chip selects may be active low or active high.

GPIO Bus Interface

The GPIO bus interface is split across two ports.

  • Port A: provides 16 advanced GPIO bits. Each bit can be individually configured as digital IO, PWM, continuous pulsed, single pulsed or interrupt input. Pulse widths, duty cycle and pulse sense are also programmable. The lower 2 bits of the Port A GPIOs have a low-pass filter which can be selected via a jumper and can be used with PWM to turn the GPIO into an analog output.
  • Port B: provides a further 16 digital IOs.

Analog

The analog interface provides 4 analog inputs which can be sampled with 8 bit resolution.

API

The API (Application Programming Interface) is designed for easy use in creating custom applications incorporating simple high level commands. Some examples of functions which can be called are shown here:

Nano_GetEvents() Nano_SPIMasterSetFrequency()
Nano_SPIMasterReadWrite()
Nano_GPIOASetContinuousMode() Nano_SPIMasterWrite()
Nano_GPIOASetPulseMode() Nano_SPIMasterRead()
Nano_GPIOASetPWMMode() Nano_SPISlaveBufferWrite()
Nano_GPIOASetDigitalOutputMode() Nano_SPISlaveBufferRead()
Nano_GPIOAGetDigitalInput() Nano_SPISlaveArm()
Nano_GPIOAGetInterruptInput()
Nano_GPIOBWrite() Nano_I2CMasterSetFrequency()
Nano_GPIOBRead() Nano_I2CMasterScanConnectedDevices()
Nano_GPIOBSingleBitWrite() Nano_I2CMasterWrite()
Nano_GPIOBSingleBitRead() Nano_I2CMasterRead()
Nano_I2CMasterWriteRead()
Nano_ADCRead() Nano_I2CSlaveArm()

Examples


In order to help users develop custom applications, a collection of GUI and non-Windows style applications have been developed to show how to link to the API.

The application examples are written in C/C++ and Visual C++ on Windows 2000/XP/Vista, Linux or Mac OS X. The example applications can be run before you purchase the product to get a feel for what APUS can do for you.

The application examples are well documented.

APUS I2C/SPI/GPIO Host Adaptor簡易規格下載
 

最新消息| 公司簡介| 產品簡介 | 線上報價 | 經銷夥伴 | 下載 | 搜尋商品 | 聯絡我們

© 2018 標高電子股份有限公司 著作權所有,並保留一切權利。