Dearborn Protocol Adapter 4 Plus
Part No: MPDG-CAN-DPA4PLUS DPA 4 Plus
是一台目前市場上最快速最可靠及堅固的硬體轉換器,它甚至超越美國的軍用規格。
DPA 4 Plus是用來做為電腦與通訊網路間互連之用的,它支援來自下列的各種應用程式: Allison, Bendix, Caterpillar, Cummins, Detroit Diesel, Eaton, Freightliner,
International, Mack, Meritor-WABCO, Vansco 以及 Volvo, 此外它還包括汽車的各種OEM標準及應用。
支援的通訊協定: CAN (ISO11898), GMLAN,
ISO11898 (CAN), J1587, J1708, J1850 GM (Class 2), J1922, J1939, J1979,
J2284, J2411 (GM SWCAN), ALDL, Windows 98/Me/NT/2000/XP/Vista.
支援的應用程式APIs: RP1210 & Compliant Drivers, C
library API for Windows and LabVIEW.
DPA 4
Plus Diagnostic Software Compatibility
The DPA 4 Plus is RP1210A
compliant and should work with any RP1210A compliant application. It has
been thoroughly validated against the following OEM and component
applications:
- Allison DOC
- Bendix ACOM
- Caterpillar Electronic Technician
- Cummins Insite
- Dana Diagnostic Tool
- Detroit Diesel Diagnostic Link
- Detroit Diesel Reprogramming Station
- Eaton ServiceRanger
- Freightliner ServiceLink
- International Diamond Logic Builder
|
- International InTune
- International Master Diagnostics
- International ServiceMaxx
- Mack VCADS/PTT
- Meritor-WABCO Toolbox
- Vansco VMMS
- Volvo VCADS/PTT
- ZF-Meritor TransSoft
|
If you have a question
about an RP1210A-compliant application that is not listed, do not hesitate
to contact our
technical
support department , as we have probably tested with that application as
well.
DPA 4 Plus
Supported Protocols and Standards
From light-duty through
heavy-duty, the DPA 4 Plus supports your entire fleet! The DPA 4 Plus
provides more protocol, standards, and operating system support than any
other commercially available diagnostic adapter. Support and standards
include:
RP1210
Protocols
|
Operating
Systems
|
Standards |
Other
Protocols
|
J1939
J1708/J1587
CAN
|
Windows Vista
- All versions
Windows XP -
All versions
Windows 2000
|
TMC RP1210A
CE Compliant
SAE J1979
VEPS
J2214/J2461
|
GMLAN
J2284
(CAN @500k)
J2411
(GM SWCAN)
ALDL
J1850
VPWM
|
PC
Requirements
The following are the PC
requirements to use the DPA 4 Plus.
-
IBM-Compatible, 1GHz or faster
-
256Mb RAM (512MB Preferred)
-
25 Mb Free Hard-Disk Space
-
USB Port, USB Version 1.1 or Higher
-
Computer Administrator Priviledges
|
Common Applications |
Application |
Description |
Diagnostic Interface |
The most common application
for our DPA hardware adapters (excludes
DPA III/i ASCII version) is as an OEM-labeled wireless and hard-wired
interface for diagnostic software. |
PC Test Interface |
Many customers integrate our
DPA hardware adapters (excludes DPA III/i
ASCII version) into Product Validation/Design Validation (PV/DV) or
end-of-line test applications. |
Development Interface |
Our
DPA hardware adapters (excludes DPA III/i ASCII version) can
also be used with our Data Link Monitor (DLM) software as an analysis tool for network development. |
EOL Interface |
When connected to a PLC, the
DPA III/i hardware adapter will monitor or collect data in an EOL
(End-Of-Line) test system. |
Easy Interface |
Without learning C
programming, the DPA
III/i hardware adapter permits easily
integrating vehicle network informatin into specific applications. |
Windows CE Interface |
The
DPA III/i hardware adapter integrates vehicle and automation
networks to the Palm Pilot, WinCE, etc. |
Available
Accessories and Options
Part Number |
Product Name |
MP-J1939-04-CABLE
|
This special cable lets you
directly connect your DPA (fitted with a "/T" endplate) to Deutsch 6- and
9-pin truck diagnostic connectors. |
MP-OBDII-O-CABLE
|
A 6-foot cable with a
standard automotive "OBDII" diagnostic connector at one end. The other end of the cable is open-ended to let you custom tailor this cable for your specific needs. |
Related Products
|
Part Number |
Product Name |
MP-DLM |
Data Link Monitor (DLM) software – our
monitoring and analysis software application lets You validate in-vehicle network interfaces using CAN (canbus), GMLAN, J1587, J1708, J1850 GM (Class 2), J1850 Ford (SCP), J1850 DCX, J1939, J1979, J2284, and J2411 (GM SW) protocols. |
MP-OBDII-BOX |
Dearborn OBDII Breakout Box – our OBDII box gives you a practical and easy way to establish in-line electrical connection to the Vehicle On-Board Diagnostic (SAE J1962 or OBDII) connectors. |
Software and Device
Drivers
DPA Installation CD
[Free!]
The ZIP file (below) contains all of the files on our new installation CD. It contains all the current drivers for all products in our DPA family. Download the file then Open it to extract the contents. When done, run the DPAInstall.EXE program to start.
-
DPA Installation CD – Version 3.02 (ZIP, 18,244K)
DPA customers can receive a current
version of the DPA Installation CD at no cost by mail. Include your
full name, company name, mailing address, telephone number including
extension if applicable, and email address. Send the request to
DG Technical Support.
New!
DPA "Adapter Validation Tool (AVT)" and "Why My Adapter Isn’t Working..."
This "Adapter Validation Tool (AVT)" application allows you to test the DPA to validate its full functionality. Download the file, Unzip it and run AdapterValidationTool.exe to start the AVT program.
There is also a closely related companion document to the AVT "Why My Adapter Isn’t Working And What To Do About It", regarding troubleshooting the DPA and RP1210 adapters. It was
jointly written by Dearborn Group Technologies, NEXIQ Technologies,
and Noregon Systems.
Product Information
Product Manuals
Firmware
Examples
Source Code Examples
|
|
|