CANopen - CAN Bus 之工業控制|eAutomind

wwwMicroport

 現在的位置: 首頁產品簡介

Kvaser Memorator HS/SWC

(未稅)台幣定價:0
產品價格標示為"0"表示未定價,
    索取報價請按聯絡我們
Kvaser Memorator HS/SWC
 

簡易規格下載

Kvaser Memorator HS/SWC

CAN, LIN, ISO11898-2/3, USB to CAN, PCI to CAN, PC104 to CAN, UART to CAN, PCI Express to CAN, LIN to CAN, ISA to CAN, J1587, K-Line, SWC, J1850, CAN Development Kit

Kvaser Memorator makes it possible for you to log data from a CAN bus to a standard SD or MMC disk. Kvaser Memorator provides a dual channel CAN bus interface with a standard USB interface and is delivered with a SD disk. Support for High-Speed, Low-Speed and Single-Wire CAN through different product versions.
 

MPKV-CAN-U2C-MEMO-HS/SWC
 

Description

Kvaser Memorator has a USB connection and can be used as a powerful CAN to USB interface (like our USBcan II adapter) as well as a standalone CAN data logger - two products in one! As a data logger, it is for example perfect as a flight recorder due its compact design. A great advantage is that all configurations are made with a user-friendly configuration program and are stored on the flash disk. It makes it both easy and convenient to set configurations with the PC and download it to Kvaser Memorator for use in the field.

 

Functions in Kvaser Memorator

Triggers


Kvaser Memorator can log continuously, or logging can be triggered by external triggers (rising or falling edge) and/or by messages and signals on the CAN bus (triggered by identifier, or data contents.) Pre- and post-triggers are available.

Filters

To enhance logging performance, Kvaser Memorator can filter out selectable messages to be logged. The identifiers can be picked from a database, or all messages can be logged.

Memory cards

Standard MMC or SD type flash memory cards can be used. Larger memory cards, up to 1 GB, can be used. See our support pages for more information.

Configuration software in the PC
  • Configuration of the CAN controller, i.e. bit rate and filters.
  • Configuration of the trigger conditions.
  • Configuration of filter for messages to be stored.
  • Configuration upload and download via USB.

Major features of Kvaser Memorator

  • One device for desktop and laptop.
  • Quick and easy plug-and-play installation.
  • Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
  • CAN messages are time-stamped with 10 microseconds resolution.
  • Large on-board RAM buffer for CAN messages.
  • Supports 〝listen-only〞 mode for bus analysis tools.
  • Driver support for major operating systems.
  • 100% compatible with applications written for Leaf, LAPcan, PCIcan, PCcan and USBcan with Kvaser’s CANlib.
  • One SD/MMC connector that accepts SD or MMC flash disks, currently up to 1 GB.
  • One CAN connection ISO-11898 high-speed, 50kbit/s up to 1 Mbit/s (Philips TJA1050).
  • Optional, second CAN connection that can be either high-speed (TJA1050), low-speed (Philips TJA1054), or single-wire (AU5790)
  • One USB 1.1 connection (12 Mbit/s). This connection is compatible with USB 2.0.
  • Power from CAN bus or from the USB side.
  • Built-in real time (calendar) clock with battery backup.
  • Logger status is indicated with four externally visible LEDs.
  • Plastic housing with dimension WLH about 509025 mm (circa 2 x 3,5 x 1 inch)

Technical Specification

 

Property Value
Galvanic Isolation No
Bitrate 5-1000 kbit/s
Silent mode Yes
Error frame generation Yes
Error frame detection Yes
Weight 150 g
Timestamp resolution 30
On board buffer Yes
Maximum message rate, send 6000
Maximum message rate, receive 12000
Sound No
Clock synchronization N/A
Dimensions (WxLxH) 50x90x25 mm (2.0x3.5x1.0in.)

Kvaser Memorator HS/SWC  (No. 73-03130-00234-0)

Kvaser Memorator HS/SWC簡易規格下載
 

最新消息| 公司簡介| 產品簡介 | 線上報價 | 經銷夥伴 | 下載 | 搜尋商品 | 聯絡我們

© 2018 標高電子股份有限公司 著作權所有,並保留一切權利。