Part No:MPKV-CAN-P1042C-HS/HS (DSUB 9 connector)
MPKV-CAN-P1042C-HS/HS-IDC (IDC 10 connector)
Kvaser PC104+ is a PC/104-Plus compatible CAN board. It has a dual channel CAN interface and a high-performance microcontroller on board.
Compact and self-stacking, the Kvaser PC104+ board complies with the flexible PC/104-Plus specification. Allowing embedded system designers to substantially reduce development costs and time. The Kvaser PC104+ board represents a dual channel CAN interface, with a high performance microcontroller onboard.
Hardware
- Compliant with the PC/104-Plus specification
- Stack-through connector
- On-board 16-bitmicrocontroller
- Communicates with the PC through a fast DPRAM
- CAN Controller from Renesas (M16C)
- Supports CAN 2.0 A and 2.0 B (active)
- Supports Silent Mode
- High-speed ISO 11898 compliant driver circuits, supports bit rates up to 1 Mbit/s
- Galvanic isolation between the CAN-controller and the CAN-driver
- CAN oscillator frequency: 16 MHz
- Quick and easy plug-and-play installation
- Dimensions 91 x 96 mm (approx. 3.6 x 3.8 in.)
- Interfaces the CAN bus with IDC Headers or 9 pin DSUB connectors
- Wide temperature range, -40°C - +85°C
Note: the ISA bus connector is a pass-through connector. The card does not use the ISA bus. It is PCI only.
Technical Specifications
Property |
Value |
Galvanic Isolation |
Yes |
Bitrate |
5-1000 kbit/s |
Silent mode |
Yes |
Error frame generation |
Yes |
Error frame detection |
Yes |
Weight |
100 g |
Timestamp resolution |
1 |
On board buffer |
No |
Maximum message rate, send |
0 |
Maximum message rate, receive |
0 |
Sound |
No |
Clock synchronization |
N/A |
Dimensions (WxLxH) |
91x96x20 mm (3.6x3.8x0.8in.) |
Kvaser PC104+ HS/HS (No.73-03130-00352-1)
Kvaser PC104+ HS/HS-IDC (No.73-03130-00336-1) |