TCP/IP,串列埠,E-P132-T-100
Part No:MPEth-TCP/IP-E-P432-W
Hardware Specification
|
LAN |
Ethernet:
2* 10/100 Mbps (1* Powered Device), RJ45 (Redundant mode, Switch mode)
Setting by X-Ware utility.
Protection: Built-in 1.5 KV magnetic isolation |
WLAN
|
IEEE 802.11b/g |
Serial |
No. of
ports: 4 RS-232/422/485 ports, Terminal Block, S/W selectable
RS-232
Signals: TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
Serial
Line Protection: 15 KV ESD for all signals |
Beeper
|
Beeper
for event warning or unit positioning |
Relay
Alarm |
Relay
Output for event warning |
USB |
1x USB2.0
host for Firmware Upgrade and configuration |
Serial
Communication Parameters |
Parity:
None, Even, Odd, Space, Mark
Data
bits: 5, 6, 7, 8
Stop
bits: 1, 1.5, 2
Flow
control: RTS/CTS, XON/XOFF
Speed:
110 bps to 460 Kbps |
LED |
PWR 1 / Ready: 1) Red
On: Power
is on and booting up. Red Blinking: Indicates an IP conflict, or DHCP or
BOOTP server did not respond properly. 2) Green On: Power is on and
functioning normally. Green Blinking: Located by Administrator’s
Location function.
PWR 2 / Ready: 1) Red On: Power is on and booting up. Red
Blinking: Indicates an IP conflict, or DHCP or BOOTP server did not
respond properly. 2) Green On: Power is on and functioning normally.
Green Blinking: Located by Administrator’s Location function.
PoE
indicator: PWR FWD (Green)
Eth1 Link
/ ACT: Orange Blinking: 10 Mbps Ethernet; Green Blinking:100 Mbps
Ethernet
Eth2 Link / ACT: Orange Blinking:10 Mbps Ethernet; Green Blinking:100
Mbps Ethernet
Fault:
Yellow: Power, or UTP port, or fiber port failure occurs
TX / RX:
Serial port is receiving data(Orange); Serial port is transmitting
data(Green). |
Power
Supply |
-
Power
Input: 12 to 48 VDC Reverse protection
-
Redundant Power Input : 12 to 48 VDC
-
Powered
Device (IEEE 802.3af)
|
Power
Consumption |
5 Watts |
Operating
Humidity |
5% to 95%
(Non-condensing) |
Operating
Temperature |
|
Storage
Temperature |
-20 to 85°C
(-4 to 185°F),
5 to 95%RH |
Mechanical Specifications |
Material:
Aluminum, IP30 |
Case
Dimension |
103mm (W) x
33mm (D) x 158mm (H) |
Regulatory Approval |
RoHS |
EMC |
FCC Class
A, CE Class A |
Safety
|
UL, CUL,
|
Software Feature
Protocols |
ICMP, IP, TCP, UDP, DHCP, BootP, ARP / RARP, Telnet, DNS, SNMP MIB II,
HTTP, SMTP, SNTP |
Serial
mode |
Virtual
Com / TCP Server / TCP Client / UDP / Serial Tunnel with advanced
settings of
|
4 Hosts
simultaneous connection |
Virtual
Com / TCP server / TCP Client (only raw data) |
Security |
HTTPS,
SSH v2, SSL(Optional)** |
LAN |
Ethernet:
2* 10/100 Mbps (1* Powered Device), RJ45 (Redundant mode, Switch mode)
Setting by X-Ware utility.
Protection: Built-in 1.5 KV magnetic isolation |
Event
notification |
Event
notification by email / SNMP trap / Beeper / Relay output
SNMP Trap
-
Cold/Warm Start
-
DSR,
DCD Changed
-
IP
Changed
-
Authentication Fail
SNMP
Response
-
System
MIB,
-
Interface MIB,
-
ICMP,
IP, TCP MIB
-
UDP MIB
-
RS-232
MIB
|
Utilities |
X-Ware for Windows NT/2000/XP/2003
|
Virtual
COM/TTY Drivers (WDM mode, configuration in windows device manager) |
Windows
NT/2000/XP/2003, Linux real TTY driver
|
Configuration |
Web,
X-Ware Utilities and Telnet |
Serial
API Function |
Port
Control, Input/Output Data, Port Status Inquiry |
|
|