|
Part No:MPMT-WL-EB-BT-1000
1. specifications
Objective : Supporting
product development with Bluetooth technology.
Developing Environment: PC,
firmware based.
Hardware specifications
Bluetooth Core chip : CSR
BlueCore02-External
Bluetooth module : Bluetooth Spec
V1.1Module (BlueSEM II , Class 2)
Board Size : 190 x 160 x 60 [mm]
Interface : USB / UART / SPI
Power Supply : USB / Adaptor(9V,
300mA) / Battery(4.2V, 100mAH)
Others : LED, Ear-microphone, I/O
Connector, Parallel port
Selectable I/O : 10 EA
Selectable Button : 6 EA
Test Point : 23 Points
(Main Body)
Software
-
Application Signaling Documents : Headset, Audio-gateway,
Hands-free, FTP
-
Demonstration program : Voice, Chatting, File Transfer
-
HCI Command Test Program : Using USB interface
Characteristics
Bluetooth module
featuring for various application of software.
Module replacement type
capable of supporting multi application development by turning Bluetooth
chipset module into daughter-board
Supporting various power
supply types – able to select preferred type per each application
Featuring all interfaces
supported by Bluetooth chipset (UART/ USB/ SPI/ Parallel)
Hardware for voice support
application (ear-microphone jack)
Li-Ion battery recharging
available (USB/Adaptor)
Selection of hardware I/O port
per different user available
Hardware testing possible with
test pin insert
LED available for the status
of each I/O
Bluetooth protocol signaling
chart available for application program development (Host/Embedded)
Embedded Programming is available using BlueLab SDK.
Featured Functions
Bluetooth development
tool
Embedded Programming available using BlueLab SDK.
Voice communication (Headset
profile)
Data communication (FTP
profile)
Hardware check using test pin
Li-Ion battery recharging
(Adaptor, USB)
Selection of various power
supply types (Adaptor/ Battery/ USB)
Selection of power (Button/
Slide switch)
Selective use of Bluetooth
module I/O
LED indication for Bluetooth
module I/O
Interface selection between
host and host controller communication (External Support)
Contents ( Recommended)
Experiment 1. Introduction to Bluetooth Technology
Experiment 2. Program installation and instruction
˙Demonstration : Chatting, Voice comm.,
FTP(File Transfer Protocol)
Experiment 3. Interface setup (UART, USB, SPI)
Experiment 4. Introduction to Hardware circuit
Experiment 5. Hardware measurements I
˙PCM Codec comm.
˙Data communication
Experiment 6. Hardware measurements II
˙Radio frequency energy spectrum
˙Power supply method (Battery, USB, Adaptor)
Experiment 7. Signaling process I
Experiment 8. Signaling process II
Experiment 9. Application Experiment I
˙Input and output port control.
˙Encrypted file transfer
Experiment 10. Application Experiment II
˙Communication using Headset and Audio gateway
Experiment 11. Application Experiment III
˙Network Communication between Bluetooth Device. (Piconet Experiment) |
