FireFly-BP adds AAA battery capability to the FireFly Serial adapter- the world’s smallest, lightest and most capable Class 1 Bluetooth serial adapter. Batteries Not Included

FireFly-BP uses the standard Bluetooth Serial Port profile and is compatible with all clients running under Windows™, PalmOS™, PocketPC™, Apple™, and other Bluetooth enabled platforms.

There are three ways to utilize FireFly BP:
1. Direct to a Bluetooth client: the client creates a SPP connection to the unit and uses a virtual COM style interface. Data is sent and received on the client exactly as if a serial cable was connected to a real COM port on the client.

2. Cable replacement: Pair two FireFly, or BlueportXP’s, or FirePlug USB dongles with simple Dip switches.

3. MASTER mode. FireFly BP is configured to connect out over Bluetooth into a remote client or an access point or bluetooth server.

　

FEATURES:

• Soft button ON/OFF switch.
• Low battery monitor and LED indicator.
• Automatic shutoff (programmable ) to conserve power.
• More than 10 hours of continuous connect time.
• accepts NiMH batteries, with on board charger.
• 5VDC charging jack (can also charge from pin 9).
• RS232 Male or Female DB9 Connector or
• Optional RS-422 Support.
• Very Low power, programmable discovery and Sniff modes(1-10ma standby, 5-30ma connected)
• Settings can be easily changed with AT commands via serial port and remotely over Bluetooth.
• Serial Port Baudrates from 1200 to 232K pbs, and non-standard values, defaults to 9600 or 115200 (dip switch).
• High Power (Class 1) 100Meter Bluetooth™ radio with integrated Antenna.
• 3 LEDs, Transmit/Received data, Power/Connection Status, Low/Full/Charge mode battery.