Application-specific PCAN-MicroMod baseboards

The motherboards for the PCAN-MicroMod provide an application-oriented environment. Typical characteristics of this product group include a wide supply voltage range and the protective circuit for the inputs and outputs.

CANopen® firmware is available for all PCAN-MicroMod motherboards.

Product Specifications of Mix 1

The Mix 1 motherboard combines general analog and digital requirements with temperature recording functions.

• High-speed CAN connection (ISO 11898-2)
• Bit rates from 10 kbit/s up to 1 Mbit/s
• Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
• Completely configurable using the Windows® software PCAN-MicroMod Configuration
• Operating voltage 8 - 26 V
• Aluminum casing with spring terminal connectors. Optional DIN rail fixing option available
• Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)

6 digital inputs with the following properties:

• Pull-up or Pull-down circuit selectable in groups (3 groups)
• Voltage level difference 5 - 18 V
• Schmitt trigger behavior, inverting
• Low pass behavior
• Parallel switching of one frequency input for 4 digital inputs for an alternative use (e.g. for fast status changes, counters)

2 analog inputs with the following properties:

• Pull-down circuit
• Measuring range unipolar 0 - 5 V
• Resolution 10 bit, sample rate 1 kHz
• Measuring range extension optional
• Protection against under- and overvoltages

2 temperature inputs for the connection of NTC resistors (type EC95F103W), measuring range 0 - 70 ºC 
(32 to 158 °F)

2 digital outputs (frequency outputs) with the following properties:

• Fast Low-side switch, max. 55 V, 0.75 A
• Short-circuit protection

Product Specifications of Mix 2

The Mix 2 motherboard combines general analog and digital requirements with temperature recording functions.

• High-speed CAN connection (ISO 11898-2)
• Bit rates from 10 kbit/s up to 1 Mbit/s
• Compliant with CAN specifications 2.0A (11-bit ID) and 2.0B (29-bit ID)
• Completely configurable using the Windows® software PCAN-MicroMod Configuration
• Operating voltage 11 - 26 V
• Aluminum casing with spring terminal connectors. Optional DIN rail fixing option available
• Extended operating temperature range from -40 to 85 °C (-40 to 185 °F)

2 digital inputs with the following properties:

• Pull-up or Pull-down circuit selectable in groups (1 group)
• Voltage level difference 5 - 18 V
• Schmitt trigger behavior, inverting
• Low pass behavior
• Parallel switching of one frequency input for an alternative use (e.g. for fast status changes, counters)

3 analog inputs with the following properties:

• Pull-down circuit
• Measuring range unipolar 0 - 4.1 V
• Resolution 10 bit, sample rate 1 kHz
• Measuring range extension optional
• Low pass behavior
• Protection against under- and overvoltages

2 temperature inputs for the connection of one NTC resistor (type EC95F103W) and one platinum sensor PT1000, measuring range 0 - 70 °C (32 to 158 °F) each

1 digital output with the following properties:

• Fast Low-side switch, max. 55 V, 0.75 A
• Short-circuit protection

1 analog output with the following properties:

• Voltage 0 - 10 V on PWM basis at 16 bit resolution
• Load capacity: 15 mA, short-circuit proof

1 analog output with the following properties:

• Current intensity 0 - 20 mA on PWM basis at 16 bit resolution

Scope of supply

• PCAN-MicroMod
• PCAN-MicroMod motherboard in casing including mating connectors
• PCAN-MicroMod Configuration Software for Windows®
• Manual in PDF format

CANopen® firmware is available for all PCAN-MicroMod motherboards.

MPPK-CAN-ECU-MicroMod-Mix1(002202)
MPPK-CAN-ECU-MicroMod-Mix2(002203)