|
VSI-VLT-C2
Part
No: MPDG-CAN-VSI/VLT-C2
Our Vehicle
Serial Interface/Vehicle Link Tester-Class 2 (VSI/VLT-C2) is a hardware and
software package that supports the following protocols.
Supported Protocols: GMUART, J1850 GM (Class 2) and J1850 DCX.
The Vehicle
Serial Interface - Class 2 (VSI-C2) is an instrument that enables
communications with the General Motors implementation of the SAE J1850
(Class 2) serial data bus and UART bus using a personal computer.
The VSI-C2 is compatible with any personal computer with a standard RS-232
serial communications port. The serial data buses are accessed via the
Assembly Line Diagnostic Link (ALDL) connector on the vehicle. The VSI-C2
communicates to the host computer via an RS-232 serial port. Commands from
the host include initialization, transmission of Class 2 messages, and
grounding of diagnostic lines. When the VSI-C2 is configured, it can
transmit and receive messages on the Class 2 bus. Power is supplied to the
VSI-C2 from the SAE J1962 ALDL connector or from a power adapter.
|
Common Applications
|
Application |
Description |
Vehicle Link Tester
Diagnostic |
The Vehicle Link Tester (VLT)
is a PC-based vehicle serial communications diagnostic tool. It is designed
to be used on all General Motors vehicles equipped with General Motors
implementation of the SAE J1850 (Class 2) bus. Typical applications are
vehicle powertrain development, design validation, reliability testing,
message format integrity, bus utilization and ALDL data acquisition. |
Vehicle Serial Interface |
The Vehicle Serial Interface
(VSI) is a hardware instrument that enables communication with the General
Motors implementation of the SAE J1850 (Class 2) serial data bus and UART
bus using a personal computer. It was designed to allow development of Class
2 diagnostic and data acquisition instruments on commercially available
personal computers. |
Scanner Editor |
The Scanner Editor is a
menu-driven software program designed to create and edit Vehicle Link Tester
(VLT) Class 2 scanner files. It collects data from the Class 2 bus, scales
it and displays it to you in engineering units. |
Available Accessories and Options
The
following items are available |
Part Number |
Product Name |
MP-OBDII-DB25-CABLE
|
J1962 cable for connection
to VSI hardware or DG-DPAIII-PLUS-RS/GM (VSI simulator). |
MP-RS-CABLE |
6’ molded female/male RS-232
cable. |
MP-OBDII-BOX |
An OBDII box that gives you
a practical and easy way to establish in-line electrical connection to the
Vehicle On-Board Diagnostic connector. |
Related Products
|
Part Number |
Product Name |
MP-GRYPH |
GRYPHON – our Ethernet hardware interface
gives You ethernet connection to in-vehicle networks with protocol support
for CAN (canbus), DeviceNet, GMLAN, GMUART, Honda, ISO9141-2, ISO11898
(CAN), ISO11992, ISO15765, J1850 GM (Class 2), J1850 Ford (SCP), J1850 DCX,
J1939, J1962, J2284, J2411 (GM SW), J2534, KWP2000 (ISO14230), LIN, SCI -
Chrysler, SWCAN and UBP. |
MP-HERC |
Hercules – Hercules high performance
Windows analyzer software monitor and support in-vehicle network
applications with protocol support for CAN (canbus), GMLAN, ISO11898 (CAN),
ISO15765, J1850 GM (Class 2), J1850 Ford (SCP), J1850 DCX, J1939, J1979,
J2284, J2411 (GM SW), LIN and SWCAN protocols. |
MP-OBDII-BOX |
Dearborn OBDII Breakout Box – our OBDII box
that gives you a practical and easy way to establish in-line electrical
connection to the Vehicle On-Board Diagnostic (SAE J1962 J-1962 J 1962 or
OBDII) connectors. |
See
Archive Section for previous items.
Software and Device Drivers
Note: For
previous software and driver versions, see the
Archive Section of our Download page.
Product Manuals
Note: For
previous manual versions, see the
Archive Section of our Download page.
Firmware
Examples
|
|