|
Part No
| Part No:
MPGC-CAN-UART-RS232
DESCRIPTION:
Our CAN to RS-232 converter can be used in virtual mode or
command mode. No software needed in virtual mode, just put 2 devices on
each end of the network and your RS232 devices are on the CANbus network. In
command mode any serial device puts CAN messages directly onto a CANbus
network.
Cross Reference: CAN-uVCCM
FEATURES:
- CAN 2.0A (11-bit ID standard) and/or 2.0B(29-bit ID extended)
- CANbus baud rates up to 1Mbaud, CIA DS-102 pinout (H=7, L=2, GND=3)
- RS232 DCE Female DB9 connector (TX=2, RX=3, GND=5)
- RS232 baud rates configurable up to 57600 baud
- RS232 7 or 8 data bits, odd, even, mark, space, no parity, 1 or 2 stop bits
- No isolation, if you need 1000V isolation select the ISO Option
- Simple configuration using a standard terminal or serial port
- 10 message transmit buffer, 2 message receive buffer
- LEDs for Serial TX and RX, CAN TX and RX
- Power 9-60 VDC Power from provided wall transformer
Command Mode:
Virtual Circuit Mode:
SPECIFICATIONS:
|
|
Power Supply |
|
|
Voltage |
7 to 60 Volts DC input from standard wall
transformer. |
|
Power :
Current |
¾ Watt : 150 ma |
|
COM RS232 Serial Port |
|
|
Port
Type |
RS232 3-Wire DCE |
|
Connector |
Female DB9 |
|
Baud
Rate |
4800 to 57600 |
|
Data
Bits |
7 or 8 |
|
Parity
|
Odd, even, mark, space, or no parity |
|
Stop
Bits |
1 or 2 |
|
Pin out |
DCE (TX = 2 , RX = 3 , GND = 5) |
|
Receive
Msg Buffer |
2 Messages |
|
CAN Network
Port |
|
|
Transceiver |
ISO11898 CAN Transceiver up to 1 mbit/sec |
|
Isolation |
up to 1000 VDC (optional) |
|
Connector |
Female DB9 |
|
Pinout |
C.I.A. DS-102 (CAN_H = 7, CAN_L = 2, CAN_GND = 3) |
|
Receive
Msg Buffer |
10 Messages |
|
LEDs |
|
|
RS232 |
TX & RX activity |
|
CANbus |
TX & RX activity |
|
Power |
Power on |
|
Slew Rate Adjust |
|
|
Range |
MIN >= 2.5 V/µs, MAX <= 20 V/µs |
|
Method |
Adjustable via potentiometer and screwdriver |
|
Environmental |
|
|
Temperature |
Industrial Rated Components (-40C to +85C) |
|
