|
Part No.MPGC-CAN-UART-RS232-ISO1000V
Description: No software needed in virtual mode,
just put 2 devices on each end of the network and your RS232 devices are on
the CANbus network. In command mode any serial device puts CAN messages
directly onto a CAN network.
Features:
-
CAN 2.0A
(11-bit ID standard) and/or 2.0B (29-bit ID extended)
-
CANbus baud
rates up to 1Mbaud, CIA DS-102 pinout (H=7, L=2, GND=3)
-
RS232 DCE
Female DB9 connector (TX=2, RX=3, GND=5)
-
RS232 baud
rates configurable up to 57600 baud
-
RS232 7 or 8
data bits, odd, even, mark, space, no parity, 1 or 2 stop bits
-
1000V isolation, if you
don’t need 1000V isolation use GC-CAN-RS232
-
Simple
configuration using a standard terminal or serial port
-
10 message
transmit buffer, 2 message receive buffer
-
LEDs for
Serial TX and RX, CAN TX and RX
-
Power 9-60 VDC
Power from provided wall transformer
Command Mode:
Virtual Circuit Mode:
Specifications: |
Power
Supply |
Voltage |
7 to 60 Volts DC input from
standard wall transformer. |
Power : Current |
¾ Watt : 150 ma |
COM RS232
Serial Port |
Port Type |
RS232 3-Wire DCE |
Connector |
Female DB9 |
Baud Rate |
4800 to 57600 |
Data Bits |
7 or 8 |
Parity |
Odd, even, mark, space, or
no parity |
Stop Bits |
1 or 2 |
Pinout |
DCE (TX = 2 , RX = 3 , GND =
5) |
Receive Msg Buffer |
2 Messages |
CAN
Network Port |
Transceiver |
ISO11898 CAN Transceiver up
to 1 mbit/sec |
Isolation |
up to 1000 VDC (optional) |
Connector |
Female DB9 |
Pinout |
C.I.A. DS-102 (CAN_H = 7,
CAN_L = 2, CAN_GND = 3) |
Receive Msg Buffer |
10 Messages |
LEDs |
RS232 |
TX & RX activity |
CANbus |
TX & RX activity |
Power |
Power on |
Slew Rate
Adjust |
Range |
MIN >= 2.5 V/µs, MAX <= 20
V/µs |
Method |
Adjustable via potentiometer
and screwdriver |
Environmental |
Temperature |
Industrial Rated Components
(-40C to +85C) |
|