|
Part No: MPCAN-CAN-U2C-232CAN
General Information:
232CAN is a very small blue dongle that plugs into any PC
COM Port, or any other RS232 port in an embedded system and gives an
instant CAN connectivity. This means it can be treated by software
as a standard COM Port (serial RS232 port) which eliminates the need
for any extra drivers. Sending and receiving can be done in standard
ASCII format.
Dimensions:
Length: 68mm, Width: 31mm, Height:
16mm.
Features:
The module plugs
directly into a standard serial port and
provides a standard DB9 male output to CAN
systems according to CiA (CAN in Automation)
recommendations. It is powered with 8-15VDC
through the CAN connector with ESD
protection and reveresed power. It consumes
max 100mA, but normally not more than 40mA
(this depends on BUS load and eventual CAN
cable errors etc.). Use your own RS232
LIB/drivers (in e.g. Visual Basic, Deplhi,
C++ etc.).
CAN Pin
assignement:
Pin assignement according to CiA
recommendations DS102-1.
The 232CAN is powered with +Vin (9-15VDC) at pin 9 and GND at pin 3.
How to connect:
|
