Communication Interface PC/104Plus
DeviceNet-Master
The Communication Interface as a Master on the DeviceNet network exchanges
independently the data between the devices on the bus and the internal
process image. The process image is held in the Dual-Port-Memory and the
application can access the data directly.
The configuration is carried out with the aid of our System Configurator
SyCon® or directly from the application program. It is stored in the device
and is available immediately at the start time.
The Slave devices are configured by the Master via the DeviceNet network.
With it only the relevant data in the process image is passed to or is taken
from theapplication.
Facts at a glance:
Execution of the DeviceNet protocol stack without
load of the PC
Direct access to the process data in the
Dual-Port-Memory
Easy diagnostic via LED status display
Configuration data is stored in internal FLASH
memory
Graphic System Configurator with unified ‘look
and feel’ for all fieldbus systems
Identical ‘easy-to-use’ application interface on
all Communication Interfaces
Device driver for Windows® and Linux included
OPC server available
Product
CIF 104P-DNM
Description
Communication Interface PC/104Plus
DeviceNet-Master
Option
Connector
COMBICON 5-pin
Square post 10-pin angled | \P
Square post 10-pin straight | \S
Square post 16-pin angled | \H
Square post 16-pin straight | \V