Part
No:MPMW-Flex-Tiny-FR-TJA1080
MPMW-Flex-Tiny-CAN-HS-TJA1041
MPMW-Flex-Tiny-CAN-LS-TJA1054
MPMW-Flex-Tiny-RS232-MAX3227
MPMW-Flex-Tiny-LIN-TH8082
MPMW-Flex-Tiny-Line-L9637
The module FlexTiny is an
interface hardware between FlexRay protocol devices and bus cables at a
minimum size. It includes the Physical Layer device for the specific bus
system. Bus termination can be selected by closing or opening soldering
jumpers. It also provides the possibility of termination for the
shielding of the bus cables if not implemented on the host module. It
also offers an EEPROM that contains several parameters about the module
itself and is inverse polarity protected by polarized connectors.
The FlexTiny family is
available for different bus systems and can be applicated on Eberspacher
Electronics products such as FlexXCon, FlexNode and FlexCard PXI.
-
FlexTiny FR TJA1080
The driver module is equipped with a FlexRay driver TJA1080.
-
FlexTiny CAN HS TJA1041
The driver module is equipped with a CAN high speed driver TJA1041.
-
FlexTiny CAN LS TJA1054
The driver module is equipped with a CAN low speed driver TJA1054.
-
FlexTiny RS232 MAX3227
The driver module is equipped with a RS232 driver MAX3227.
-
FlexTiny LIN TH8082
The driver module is equipped with a LIN driver TH8082.
-
FlexTiny K-Line L9637
The driver module is equipped with a ISO 9141 driver L9637.
Technical features
-
The FlexTiny has physical
dimensions of 30mm width and 24mm height
-
There are no parts
mounted on the bottom side
-
The module can be mounted
either vertical or horizontal
-
It is designed for card
edge connectors of the MEC1 series from Samtec with a 1mm pitch,
double sided with a total of 38 pins plus 2 pins for polarization
|