Application:
- Modbus RTU / TCP, IEC-101, IEC-104 enabled
- TCP/IP, UDP, SMTP, POP, FTP, HTTP, SNMP Support
- SSL VPN with AES, DES, or 3DES encryption over WAN
- 256 MB Non Volatile Memory and 32 / 64 MB Memory
- Scalable from 16DI 16 DO to 48DI 40DO 8AI/AO - and above
- Remote firmware and configuration upgrade
- IEC 61850-3 Compliant Interfaces
- 2 x RS232, 1 x RS485, 2 x RS232/485 Configurable ports
- Transparent Channel / Tunneling support
- Automatic start-up and initialization following restoration of power.
- Master station to FRTU remote database download possible
- Multi master communication capability
Specifications
Specification |
SYNC 2100 |
---|---|
General |
|
Management |
Kalkitech EasyConnect Configuration utility / Web Server & SSH Interface over Secure Network |
System Protocols |
TCP/IP, UDP/IP, SMTP, POP, HTTP, FTP, SNMP |
Power System / Metering Protocols |
IEC 60870-5-101/104, Modbus RTU, Modbus TCP, DLMS, IEC 61850. |
LEDs |
LAN Ready, Data Transfer, Serial Port RX/TX, Status, Power |
Security |
NERC/CIP Compliant, SSL Tunnel, SSHv2 |
VPN |
SSL based VPN with Blowfish /AES/3DES |
Logic |
AND/OR/NOT Logic Support |
Dimensions |
170 X 200 X 370 mm |
Weight (Controller) |
1600 Grams |
CPU |
RISC based 200 / 400 MHz ARM 9 CPU |
Non Volatile Storage |
256 MB |
Volatile Storage |
32MB/64MB |
Operating System |
Embedded Linux Kernel Version 2.6 |
Maintenance |
Direct over Debug Port or Console Port / Remotely Over TCP/IP over GPRS/CDMA |
Alarms |
Configurable SMS Alarms for key events within Sub-Station |
Certifications |
CE / IEC 61850-3/ IEC 61850-KEMA |
Interfaces |
|
Cellular |
CDMA / GPRS with extern all Modem |
Digital IO Interfaces |
16 DI / 8 DO |
Analog IO Interfaces |
Via Expansion Modules |
IO Expansion |
AI/DI/DO/AO Expansion upto 512 IOs |
Serial |
|
Ports |
1 RS485. 2 RS232/485. 2 RS232 |
Throughput |
115.2 KBPS |
Signal Support | S1 F ull Modem. S2.S4 TXD. RXD. RTS. CTS. S5-S6 TXD.RXD |
Pass-Through Channel |
Pass-Through / Transparent Channel support |
Ethernet |
|
Ports |
1 RJ45 / FO Port (Multi Mode Fiber with ST Connector) |
Physical Layer |
10/100 Base-T / 10/100 Base-F |
Data Rate |
10/100 Mbps (auto-sensing) |
Mode |
Full or Half-Duplex (auto-sensing) |
Power Requirements |
|
Power Input |
9-30 VDC/ 40-56 VDC/ 90-260 VAC |
Power Supply |
Optional adapters for 85-330 VAC and 12/24/48/110/220 VDC |
Power Consumption (Main CPU) |
4 W |
Environment |
|
Operating Temperature |
-20 to 70°C (-4 to 158°F) |
Storage Temperature |
-20 to 80°C (-4 to 176°F) |
Relative Humidity |
5% ? 95% RH non condensing |
Ethernet Isolation |
1500VAC min per IEEE802.3/ANSI X3.263 |
Emission |
|
Conducted Emission |
EN 55022:1998+A1:2000+A2:2003 Class A |
Radiated Emission |
EN 55022:1998+A1:2000+A2:2003 Class A |
Immunity |
|
Electrostatic Discharge |
IEC 61000-4-2:2001 - 8 kV Contact Discharge, 15 kV Air Discharge |
Radiated Susceptibility |
IEC 61000-4-3:2002 - 20 V/m |
Electrical Fast Transient / Burst |
IEC 61000-4-4:2004 - +/- 4 kV Signal Ports @ 2.5kHz, +/-4kV DC Power Ports, +/- 4 kV Earth ground ports 3 |
Surge Protection |
IEC 61000-4-5:2001- +/- 2kV line-to-earth, +/- 1 kV line-to-line |
Induced (Conducted) RFI |
IEC 61000-4-6:2003 - 10V Signal Ports, 10V DC Power Ports, 10 V Earth Ground Ports 3 |
Magnetic Field |
IEC 61000-4-8:2004 - 40A/m continuous, 1000 A/m for 1s Enclosure Ports |
Voltage Dips & Interrupts |
IEC 61000-4-29:2004 - 30% for 0.1s, 60% for 0.1s, 100% for 0.05s |
Damped Oscillatory |
IEC 61000-4-12:2004 - 2.5kV common, 1kV diff. Mode @ 1 MHz Signal Ports and DC Power Ports |
Models Available