Products |
Description |
Palm III/VII HotSync Cable |
|
A Palm serial HotSync
cable is used on the Dyno-Scan product to connect the Palm handheld
to the OBD II adapter.
Visit our
Supported
Palms for assistance with selecting a HotSync cable. |
Palm V HotSync Cable |
|
Palm serial HotSync cable
is used on the Dyno-Scan product to connect the Palm handheld to the
OBD II adapter. Visit our
Supported
Palms for assistance with selecting a HotSync cable. |
Palm m100/m105 HotSync
Cable
|
|
Palm serial HotSync cable is used on the Dyno-Scan
product to connect the Palm handheld to the OBD II adapter.
Visit our
Supported
Palms for assistance with selecting a HotSync cable. |
Palm HotSync Cable |
|
A Palm serial HotSync cable is used on
the Dyno-Scan product to connect the Palm handheld to the OBD II
adapter.
Works on select palmOne and Palm
handhelds (Palm, Inc. formerly palmOne, Inc.)
Visit our
Supported
Palms for assistance with selecting a HotSync cable. |
Palm Treo HotSync Cable |
|
A Palm serial HotSync cable is used on
the Dyno-Scan product to connect the Palm handheld to the OBD II
adapter.
Visit our
Supported
Palms for assistance with selecting a HotSync cable. |
Palm T|X/E2 Treo 650/700p
Data Cable |
|
A Palm serial HotSync cable is used on
the Dyno-Scan product to connect the Palm handheld to the OBD II
adapter.
This palmOne cable only works with the
Dyno-Scan product. It will not HotSync with your PC.
Visit our
Supported
Palms for assistance with selecting a HotSync cable. |
Sony N/S HotSync Cable
|
|
A Palm serial HotSync cable is used on
the Dyno-Scan product to connect the Palm handheld to the OBD II
adapter.
Visit our
Supported
Palms for assistance with selecting a HotSync cable. |
Sony HotSync Cable |
|
A Palm serial HotSync cable is used on
the Dyno-Scan product to connect the Palm handheld to the OBD II
adapter.
Visit our
Supported
Palms for assistance with selecting a HotSync cable. |
Handspring Visor Data Cable
|
|
A Palm serial HotSync cable is used on
the Dyno-Scan product to connect the Palm handheld to the OBD II
adapter.
This Handspring cable only works with the
Dyno-Scan product. It will not HotSync with your PC.
Visit our
Supported
Palms for assistance with selecting a HotSync cable. |
USB Cable |
|
A USB cable connects a Windows PC to the
USB OBD II adapter.
The cable is 6ft long with male A-B
connectors. |
USB Cable A to Mini-B
|
|
The USB Cable A to Mini-B cable connects
a DashDyno SPD to your Windows PC^s USB port.
IN STOCK, usually ships in 1 - 2 business
days. Press the Order button below to purchase. |
RS-232 Cable
|
|
A RS-232 Cable connects a Windows PC to
the OBD II adapter.
The cable is a RS-232 null modem cable
with female DB9 connectors on each end and is 3ft long. |
DashDyno Serial GPS Cable |
|
The DashDyno Serial GPS Cable is used to
connect a external serial GPS receiver to a DashDyno SPD.
GPS positional data is recorded by
DashDyno and saved to the SD card for playback using the Dyno-Scan
for Windows software. The external GPS receiver must support serial
communication and the NMEA 1083 protocol. Most handheld GPS
receivers from makers such as Garmin, Magellan and Lowrance will
support these features. |
Mini-DIN Cable |
|
The Mini-DIN cable is used to connect
custom vehicle sensors of your choice to your DashDyno SPD auxiliary
analog and digital inputs.
Typically one cable end is cut and the
wire ends are spliced into a custom vehicle wire harness that you
design. See the Specifications tab below for the pinout wire color
coding used inside the cable. See the DashDyno User Guide for the
mini-DIN pin and DashDyno auxiliary port pinouts. |
OBD II Cable DB9 |
|
The OBD II cable is used on the Dyno-Scan
product to connect the OBD II adapter to the vehicle.
NOTE: The OBD II cable is only designed
to connect to the Auterra OBD II adapter. Do not connect this cable
to a laptop or other any other serial port as damage may occur. |
OBD II Cable Modular |
|
The OBD II Modular cable is used to
connect a DashDyno SPD to your vehicle.
NOTE: The OBD II Modular cable is only
designed to connect to the Auterra DashDyno SPD product. Do not
connect this cable to a laptop or any Ethernet port. |
Quick Release Windshield Mount
|
|
The Quick Release Windshield Mount is
used to mount a DashDyno SPD in a vehicle. A suction cup to adhere
to the inside of the vehicle windshield. The quick release feature
mounts to the back of DashDyno making for quick removal from the
vehicle. |
12V AC Adapter |
|
The DashDyno 12V AC adapter powers
the DashDyno from an AC outlet instead of the vehicle OBD II
connector. |
USB to Serial Adapter |
|
A USB to Serial Adapter for PCs or
Notebooks without a serial port. System requirements:
- Windows 98 SE, ME, 2000, XP, Linux (Does not support Mac)
- Pentium 233MHZ or faster
- 64 MB RAM or more
- Available USB Port
|