Part No: MP-Micro-PIC-16F87X
This product has discontinued.
It is replaced by a more advanced MPLAB ICD 3 .
Summary:
Microport, the third party of Microchip, has
announced her Super ICD is a powerful, low-cost, run-time development tool.
The super ICD is based on the flash PIC16F87X and
can be used to develop for this and other PICmicro microcontrollers
from the 16CXX family. Super ICD also utilizes
the In-circuit debugging capability
built into the PIC16F87X. It also offers cost-effective In-Circuit flash
programming and debugging from the graphical user interface of the
Microchip’s MPLAB Integrated development Environment.
This enables a designer to develop and debug source
program by watching variables, singe-step and setting breakpoints.
Running at full speed enables testing hardware in
real-time.
The Super ICD is also a friendly programmer for the flash
PIC16F87X family. The Super ICD integrates
Microchip’s MPLAB ICD(ICD module,ICD Header board) into one module, it
connects the
MPLAB integrated Development Environment to the super ICD through a PC
Serial Port. Under the MPLAB software
environment the Super ICD programs and issues debug commands to the target
PIC16F87X using the ICSP(In-Circuit Serial Programming) protocol. This
protocol is communicated via a 5-inch. 6-conductor cable using a modular and
jack. So a modular jack can be designed into a target board to support
direct connection to the Super ICD, or the 40-Pin, 28-Pin emulation
interface can be used to connect to the DIP socket target board through a
40-Pin(or28-Pin) flat-cable. The super ICD provides 4-LED
indications(1)Internal Power (2)External Power (3)programming(+13V)
(4)connect:to let user understand the Super ICD^s condition all the time.
The use of internal power or external power is
selectable. Microport also issues a powerful
evaluation module PIC_EVM super 201 for user’s more advanced applications.
Super ICD Features:
˙In-Circuit run-time debugging
˙Real-time code execution
˙Single-step ˙One
hardware breakpoint ˙Variable watching
0V to 5.5V
2KHz to 20MHz ˙Integrated
development (Super ICD) with 40-Pin cable, 28-Pin cable,
Programmer interface ˙Uses
Microchip’s free MPLAB integrated development environment
˙Editor ˙Assembler
˙Linker ˙Simulator
˙Project Manager ˙Source
level Symbolic debug ˙Interface to Super ICD
and other hardware tools such as demo board, target
board(PIC_EVM Super201,
Optional), programmer board(Optional)
Devices Supported: ˙16F873; 16F874;
16F876; 16F877 Standard equipped:
˙Integrated Super ICD*1
˙40-Pin flat-cable*1 ˙6-Pin T-cable
(Apr:5-inch long)*1 ˙power Adaptor
(9V/500mA)*1 ˙Microchip’s MPLAB Integrated
Development Environment Optional Devices:
˙PIC_EVM Super 201 ˙PIC
In-Circuit Programmer |