TCP/IP,串列埠,TTL to Ethernet Converter
Part No:MPGC-TCP/IP-TTL-ETH
DESCRIPTION:
The TTL-ETH is the TTL logic level version of our
popular NET232. This Adapter alllows you to Internet (TCP/IP) enable any
device or machine with a TTL logic level serial port. Go from TCP/IP to TTL
serial with the TTL-ETH. It features a powerful built-in device server, so
you can access your TTL serial device from anywhere in the world over
internet!
The TTL-ETH is easily configured via a web page ,
and can also be set up through the TTL serial port. You can use DHCP, Auto
IP or assign a Static IP address to the TTL-ETH!
TTL logic level serial ports differ from RS232
serial ports in their voltages. TTL serial ports operate on positive logic
level voltages, typically +5V indicates a specify " logic 1" at +5V and
"logic 0" at -5V.
The TTL-ETH will not work on RS232 serial ports
and may be damaged if connected to an RS232 device. Please use the
NET232 for RS232 ports.
There are two basic modes of operation, "Redirector"
and "Serial Tunneling".
Redirector Mode: In Redirector Mode, only one
TTL-ETH is needed per
TTL serial device. Comport Redirector Software(free with purchase) is
installed on your windows PC to create a "virtual" COM Port(e.g.COM3). You
can then use this COM port attached to your PC. Create a virtual COM
Port for every TTL-ETH device on yuor network and connect to them all from a
single PC!
Serial Tunneling Mode: In
Serial Tunneling mode, two TTL’s are used to create a "Serial Tunnel"
over Ethernet. This can be thought of as cable replacement. Each TTL or
NET232 is configured to have a remote IP address that is the other TTL/NET
232 in the pair. No software is required to be loaded on a PC. This is also
an excellent option for non-windows PCs or computers. Now you can have an
infinite length RS232 cable connected over the internet.
FEATURES:
-
Local
or Worldwide Ethernet 10/100M or Internet
Connection
-
Serial
baud rates( 300, 600, 1200, 2400, 4800,
9600, 19.2k,3 8.4k, 115.2k,....921.6k)
-
Ethernet
activity, Power LED’s
-
Web
Server, configuration and user pages
-
Plastic
housing,
-
OEM
versions available for small minimum quantity
-
Includes
CD with Manuals, PC Setup and Virtual
COM Port Redirector Software
SPECIFICATIONS:
|
TTL/Serial Interface |
Data Rates
|
300 bps to 921,600
bps |
Characters |
7 or 8 data bits |
Parity |
odd, even, none |
Stop Bits
|
1 or 2 |
Control Signals |
DTR/DCD, CTS, RTS |
Flow Control |
XON/XOFF, RTS/CTS |
Connector |
DB9- DTE(male) TTL
signals |
Network Interface |
Interface |
Ethernet 10Base-T or
100Base-TX(Auto-Sensing) |
Connector |
RJ45 |
Protocols |
TCP/IP, UDP/IP, ARP, ICMP, SNMP, TFTP,
Telnet, DHCP, BOOTP, HTTP, and AUTOIP |
Indicators(LED) |
˙10Base-
T connection
˙100Base-
TX connection
˙Link & activity indicator
- Full/half duplex
˙Power |
Management |
˙SNMP,
Telnet, serial, internal web server, and
Microsoft Windows-based utility for configuration |
Security |
˙Password
protection
˙Optional
256-bit AES Rijidael encryption |
Internal Web Server |
Storage Capacity |
384KB for web pages |
Architecture |
CPU |
Based on the DSTni-EX
enhanced 16-bit, 48MHz or
88MHz, x86 architecture |
Memory |
256KB SRAM and 512KB flash |
Firmware |
Upgradeable Via TFTP and
serially |
Power |
Input Voltage |
8-24 VDC |
Packaging |
Dimensions |
63.5 x 42.67 x 20.17 mm(2.5 x
1.58 x 0.794 in) - Case without
Cable |
Weight |
92 g ( 3.2 oz ) - Approximate,
Without Power Supply |
Included
Software |
MS Windows- based Device installer software
device
installer and MS Windows - based Comm Port
Redirector |
|