Part No
Part No:MPTRY-TCP/IP-E2FC41
Introduction
E2FC41 is a device for
Ethernet extension over fiber, it supports point-to-point and networked
systems. The high fiber bandwidth connections solve problems with
electrical noise and different ground potentials over long transmission
lines. E2FC41 supports
10/100Base-TX transmissions up to 100 meters and 100Base-FX
transmissions up to 20KM. It is the perfect solution for wide distance
connections with high immunity to electrical noise.
Features
-
Wide input range DC power supply.
-
Plug-and-Play design for the installation within
seconds.
-
Compact and Rugged Metal case capable of withstanding
harsh environment.
-
Data rate: 10/100Mbps auto-negotiation and
half-/Full-duplex mode on TX port.
-
Auto MDI-X/MDI-II for 10/100Base-TX port.
-
Provides media conversion from UTP to Fiber Optic
media types
-
Supports link fault pass through function.
-
Supports far end fault function.
-
LED display to indicate the whole working status.
-
3 power input types: Direct USB power, external DC
adapter and screw terminal.
-
Support IEEE Standard: 802.3u 100BaseTX & 100BaseFX.
Specification
-
Cable: Fiber cable (9/125um).
-
One 10/100Base-TX auto-negotiation Ethernet RJ-45
port.
-
One 100Mbps fiber port with Single-mode SC connector.
-
Built in 128Kb RAM for data buffer.
-
Wavelength: 1310 nM.
-
Fiber Power:-15 ~ -8 dBm.
-
LED indicator: Power and power and TX and fiber
link/activity, full/half, 10/100MB.
-
Distance : 20KM can be up to 60KM (option).
-
Speed : Auto 10/100MB.
-
Power Consumption: 12V/160mA.
-
Power requirement: USB port power or DC input or screw
terminal from +10 to 30V.
-
Operating temperature :-10
to 50℃.
Storage temperature : -20 to 70 ℃.
Humidity: 10-90% Non-condensing.
Dimension: 151mm X 75mm X 26mm.
Weight: 400g.
Block Diagram
Application Note
|
|