Part No: MPGC-MB-GW-NET485-MB
Mounting Option:
- DIN Rail Clip & Strap
- Surface Mount Strap
- None
Overview
Need to add 10/100 Modbus TCP Ethernet to your product? If you have a serial port using Modbus RTU/ASCII Master/Slave it can now become a Modbus TCP Ethernet port with no changes to your software. The NET485 Modbus is a simple device with software all packaged inside a simple cable. The NET485 Modbus will take your serial modbus data stream and convert it to Modbus TCP Ethernet packets with no changes to your software.
The NET485 also contains Jumpers to enable optional Tx/Rx Termination Resistors.
SOFTWARE:
The NET485 Modbus is preloaded with Modbus firmware and maps all current serial Modbus commands and registers to Ethernet Modbus TCP commands and registers.
Description
Features
- Local or Worldwide Ethernet 10/100M or Internet Connection
- Modbus Serial baud rates (2400, 4800, 9600, 19.2k, 38.4k, ...115.2K)
- Ethernet activity, Power LED^s
- 10/100Mbit Ethernet - Auto-Sensing
- RS485 or RS485 Multi-Drop network support
- RS422 Support (half-duplex only)
- 7-pole terminal block for power and data lines
- Jumpers to enable optional Tx/Rx Termination Resistors
- Optional DIN Rail and Surface Mount clips available
- UL and CE certified
Specifications
| Property |
Value |
| Serial Interface(s) |
Terminal Block |
| Serial Type(s) |
RS422, RS485 |
| Interface(s) |
- RS485 or RS485 Multi-Drop network support
- RS422 Support (half-duplex only)
|
| Indicators (LED) |
Ethernet Activity, Power |
| Baud Rate |
Modbus Serial: 2400, 4800, 9600, 19.2k, 38.4k, …115.2K |
| Mounting |
Optional DIN Rail and Surface Mount clips available |
| Certificates |
UL, CE
|
| Included Software |
CD with PC Setup and Virtual COM Port Software |
| Configuration Methods |
Telnet configuration |
| Connector(s) |
- Local or Worldwide Ethernet 10/100M or Internet Connection
- 10/100Mbit Ethernet - Auto-Sensing
- 7-pole terminal block for power and data lines
- Jumpers to enable optional Tx/Rx Termination Resistors
|
|
