Part No: MPKV-CAN-USBcan-Pro-2xHS-V2
Overview
The USBcan Pro 2xHS v2 is a USB to dual channel CAN or CAN FD interface with scripting capability. With a standard USB connector and two high-speed CAN channels with ISO 11898-2 compliant CAN transceivers in two separate 9-pin D-SUB CAN connectors, it is high-performance, yet compact, and can be used as a simple dual-channel interface to connect two high speed CAN buses to a PC or mobile computer, or can be programmed to do more. The Pro version is shipped with Kvaser TRX, a lightweight development environment that lowers the bar when starting out programming the device.
Description
Features
- Supports CAN FD.
- Quick and easy plug-and-play installation.
- Supports both 11-bit (CAN 2.0A) and 29-bit (CAN 2.0B active) identifiers.
- Power is taken from the USB bus.
- Galvanic isolation.
- High-speed CAN connection (compliant with ISO 11898-2), up to 1 Mbit/s.
- Fully compatible with J1939, CANopen, NMEA 2000 and DeviceNet.
- Kvaser MagiSync provides automatic time synchronization between several PC-to-bus interfaces connected to the same PC.
- Programming functionality to support interface mode e.g. Optimize protocol handling, pre-filter CAN messages directly on the interface, or simulate missing hardware.
- Simultaneous operation of multiple devices.
Technical Data
| Property |
Value |
| Bitrate |
50-1000 kbps |
| Temp. Range |
-40 - 85 °C |
| Temestamp |
1 |
| Messages Per Second Sending |
20000 mps |
| Messages Per Second Receive |
20000 mps |
| Weight, Length, Height |
150 g, 170 mm, 25 mm |
| Channels |
2 |
| Certificates |
CE, RoHS |
| Interfaces |
USB |
| Operating System |
Linux, Win Vista, Win 10, Win 8, Win 7, Win XP |
| Connectors |
D-SUB 9 |
| Galvanic Isolation |
Yes |
| Error Frame Generation |
Yes |
| Error Counters Reading |
Yes |
| Silent Mode |
Yes |
| Sound |
No |
| Current Consumption |
Max. 500mA |
| Material |
PA66 |
| Buffers |
On Board Buffer |
|
